Cuanto Cuesta Basement Waterproofing en Folsom, CA? (2026)

Costo Promedio

$61,289–$136,318

Materiales

$45,125–$101,600

Mano de Obra (Sacramento Metro)

$2,020–$3,260

Basement waterproofing includes installing an interior French drain system along the perimeter, setting a sump pump with battery backup, applying waterproof membrane or crystalline sealant to walls, and addressing any exterior grading or downspout issues. A dry basement protects your foundation, prevents mold, and adds usable living space. This estimate uses Sacramento-area pricing for 2025-2026.

Folsom se encuentra en el condado de Sacramento (Sacramento Metro). Upscale suburb with newer construction and planned communities. El proveedor local de energia es SMUD.

Calculadora de Costos

Ajuste los detalles para obtener su estimado

Ciudad

Linear feet of perimeter

Materiales Incluidos

Interior drain tile (perforated pipe, 4")6400 linear ft

$12,800–$32,000

Sump pump with battery backup1 each

$250–$600

Washed drain gravel (3/4")320 cu yd

$11,200–$19,200

Crystalline waterproof sealant (wall application)160 bucket (5 gal)

$9,600–$24,000

Dimple drain board (wall membrane)320 roll (60 sq ft)

$11,200–$25,600

Sump discharge pipe (PVC to exterior)25 linear ft

$75–$200

Mano de Obra

Waterproofing specialist24h @ $55–$90/hr

$1,320–$2,160

Laborer / jackhammer operator20h @ $35–$55/hr

$700–$1,100

Margen del Contratista30%

0%Promedio 30%100%

Materiales

$45,125–$101,600

Mano de Obra

$2,020–$3,260

Margen

$14,144–$31,458

Costo Total Estimado

$61,289 – $136,318

$766–$1,704 por unidad

Quiere Su Precio Exacto?

Este es un estimado. Obtenga una cotizacion precisa y sin compromiso.

Llamar (916) 476-7689 Cotizacion Gratis

Cronograma del Proyecto

Assessment & planning

1-2 hours

Inspect the basement for water intrusion points, test humidity levels, examine exterior grading, and design the drainage system layout.

Perimeter trench & drain installation

2-4 days

Jackhammer a channel around the basement perimeter (12-18" wide, below slab level), lay drain tile on a gravel bed, and connect to the sump pit.

Sump pump & wall treatment

1-2 days

Install sump pump and battery backup in the pit, run discharge pipe to exterior, apply dimple board and crystalline sealant to basement walls.

Concrete patching & cleanup

1 day

Pour new concrete over the drain channel, smooth and finish to match existing slab. Clean up dust and debris. Test the sump pump system.

Desglose de Materiales

Material	Cantidad	Unidad	Costo Unitario	Total
Interior drain tile (perforated pipe, 4")	6400	linear ft	$2–$5	$12,800–$32,000
Sump pump with battery backup	1	each	$250–$600	$250–$600
Washed drain gravel (3/4")	320	cu yd	$35–$60	$11,200–$19,200
Crystalline waterproof sealant (wall application)	160	bucket (5 gal)	$60–$150	$9,600–$24,000
Dimple drain board (wall membrane)	320	roll (60 sq ft)	$35–$80	$11,200–$25,600
Sump discharge pipe (PVC to exterior)	25	linear ft	$3–$8	$75–$200

Basement Waterproofing en Folsom — Preguntas Frecuentes

How much does basement waterproofing cost?+

Interior perimeter drain systems cost $3,000-$8,000 for an average basement (80 linear ft). Full systems with sump pump, wall treatment, and exterior corrections run $6,000-$15,000. Costs vary by basement size and severity.

Is interior or exterior waterproofing better?+

Interior systems are less expensive and less disruptive. Exterior waterproofing (excavating around the foundation) is more thorough but costs 2-3x more. For most Sacramento homes, interior systems are highly effective.

Do Sacramento homes have basements?+

Basements are uncommon in Sacramento but not rare, especially in older homes (pre-1960) and homes in the foothills. Crawl spaces are more common and also benefit from waterproofing and moisture barriers.

How often should the sump pump be tested?+

Test your sump pump quarterly by pouring water into the pit until it activates. Check the battery backup annually. Replace the pump every 7-10 years as a preventive measure.