How Much Does Hardwood Floor Installation Cost in San Francisco, CA? (2026)

Average Cost

$1,450,934–$3,303,350

Materials

$1,158,823–$2,639,575

Labor (San Francisco)

$1,924–$3,105

Labor rates in San Francisco are +35% compared to Sacramento Metro baseline.

Hardwood flooring adds warmth, value, and timeless beauty to any home. This estimate covers subfloor preparation, moisture barrier installation, nailing or floating engineered or solid hardwood planks, and finishing with shoe molding and transitions. In NorCal, engineered hardwood is recommended for slab-on-grade homes due to moisture concerns. Pricing scales per square foot of floor area.

NorCal's dry summers and wet winters cause wood to expand and contract. Maintain 30–50% indoor humidity and leave a 3/8-inch expansion gap around all walls.

San Francisco is located in San Francisco County (San Francisco). Iconic fog city with Victorian painted ladies, Edwardian flats, and modern high-rises. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Square feet

Materials Included

Engineered hardwood planks (oak, 5 in wide)262500 sq ft

$1,050,000–$2,362,500

Moisture barrier underlayment262500 sq ft

$78,750–$196,875

Transition strips (T-molding, reducers)4 each

$48–$140

Shoe molding / quarter round (8 ft)10000 piece

$30,000–$80,000

Flooring nails or adhesive1 kit

$25–$60

Labor(San Francisco +35%)

Flooring Installer30h @ $54–$88/hr

$1,620–$2,633

Finish Carpenter5h @ $61–$95/hr

$304–$473

Contractor Markup25%

0%Avg 30%100%

Materials

$1,158,823–$2,639,575

Labor

$1,924–$3,105

Markup

$290,187–$660,670

Estimated Total Cost

$1,450,934 – $3,303,350

$2,902–$6,607 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

Project Timeline

Subfloor Preparation

0.5–1 day

Remove existing flooring, check subfloor for levelness (within 3/16 in per 10 ft), repair squeaks, and apply leveling compound if needed.

Acclimation

3–5 days

Stack hardwood in the installation room for 3–5 days to acclimate to the home's temperature and humidity levels.

Installation

2–4 days

Lay moisture barrier, install planks using nail-down, glue-down, or floating method, and stagger joints for structural integrity.

Trim & Finishing

1 day

Install shoe molding, transition strips at doorways, and touch up any scratches. Vacuum and damp-mop the completed floor.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Engineered hardwood planks (oak, 5 in wide)	262500	sq ft	$4–$9	$1,050,000–$2,362,500
Moisture barrier underlayment	262500	sq ft	$0.3–$0.75	$78,750–$196,875
Transition strips (T-molding, reducers)	4	each	$12–$35	$48–$140
Shoe molding / quarter round (8 ft)	10000	piece	$3–$8	$30,000–$80,000
Flooring nails or adhesive	1	kit	$25–$60	$25–$60

Hardwood Floor Installation in San Francisco — FAQ

Solid vs. engineered hardwood — which is better for NorCal?+

Engineered hardwood handles NorCal's seasonal humidity swings better than solid. It can also be installed over concrete slabs, which are common in the Sacramento Valley.

How long does hardwood flooring last?+

Solid hardwood lasts 75–100 years and can be refinished 6–8 times. Engineered hardwood lasts 30–50 years and can typically be refinished 1–3 times depending on veneer thickness.

Do I need to remove baseboards before installation?+

Removing baseboards provides the cleanest look. Alternatively, shoe molding can be installed over existing baseboards to cover the expansion gap.

What is the acclimation period?+

Hardwood should sit in the room for 3–5 days before installation to adjust to the home's moisture and temperature. This prevents gaps and buckling after installation.