Cuanto Cuesta Flat Roof Installation en Sunnyvale, CA? (2026)

Costo Promedio

$32,910–$58,682

Materiales

$23,490–$42,340

Mano de Obra (South Bay)

$1,825–$2,800

Las tarifas de mano de obra en South Bay son +25% comparadas con la linea base de Sacramento Metro.

Flat roof installation covers low-slope and no-slope roofing systems common on NorCal commercial buildings, modern residential designs, patio covers, and room additions. We install TPO (thermoplastic polyolefin), EPDM (rubber), and modified bitumen membranes. Each project includes proper insulation board, tapered crickets for drainage, fully adhered or mechanically attached membrane, and flashing at all parapet walls, curbs, and penetrations. TPO is the most popular choice for its cool-roof reflectivity, weldable seams, and 20-30 year warranty.

Sunnyvale se encuentra en el condado de Santa Clara (South Bay). Major tech hub with mid-century Eichler homes and newer townhouse developments. El proveedor local de energia es PG&E.

Calculadora de Costos

Ajuste los detalles para obtener su estimado

Ciudad

Roofing Squares (100 sq ft each)

Materiales Incluidos

TPO Membrane (60-mil, white, 10 ft wide)100 square

$12,000–$20,000

Polyiso Insulation Board (2", 4x8 sheets)150 sheet

$4,500–$8,250

Gypsum Cover Board (1/2", 4x8 sheets)150 sheet

$2,700–$4,500

Membrane Bonding Adhesive & Lap Sealant10 kit

$1,200–$2,200

Roof Drains or Scuppers2 each

$90–$190

Parapet Wall Flashing & Termination Bar600 linear ft

$3,000–$7,200

Mano de Obra(South Bay +25%)

Commercial Roofing Foreman6h @ $75–$113/hr

$450–$675

Flat Roofing Crew (2-3 workers)10h @ $138–$213/hr

$1,375–$2,125

Margen del Contratista30%

0%Promedio 30%100%

Materiales

$23,490–$42,340

Mano de Obra

$1,825–$2,800

Margen

$7,595–$13,542

Costo Total Estimado

$32,910 – $58,682

$3,291–$5,868 por unidad

Quiere Su Precio Exacto?

Este es un estimado. Obtenga una cotizacion precisa y sin compromiso.

Llamar (916) 476-7689 Cotizacion Gratis

Codigo de Construccion de California

CA Title 24 requires cool-roof-rated membranes with a minimum aged solar reflectance of 0.55 and thermal emittance of 0.75 for low-slope roofs. Minimum R-value for roof insulation is determined by climate zone. Positive drainage (1/4" per foot minimum slope) is required per CBC.

Cronograma del Proyecto

Existing Roof Removal

0.5-1 day

Remove existing membrane, insulation, and flashing. Inspect the roof deck for rot, sagging, or structural issues. Repair or replace damaged decking.

Insulation & Cover Board

0.5-1 day

Install polyiso insulation board with tapered sections to create positive drainage toward drains or scuppers. Apply gypsum cover board over the insulation for membrane protection.

Membrane Installation

1-2 days

Roll out TPO membrane, fully adhere or mechanically attach to the cover board, and heat-weld all seams with a hot-air welder. Flash all penetrations, drains, and parapet walls.

Drainage & Final Inspection

0.5 day

Install or reconnect roof drains and scuppers. Flood-test the membrane for leaks. Clean the work area and schedule the building department inspection.

Desglose de Materiales

Material	Cantidad	Unidad	Costo Unitario	Total
TPO Membrane (60-mil, white, 10 ft wide)	100	square	$120–$200	$12,000–$20,000
Polyiso Insulation Board (2", 4x8 sheets)	150	sheet	$30–$55	$4,500–$8,250
Gypsum Cover Board (1/2", 4x8 sheets)	150	sheet	$18–$30	$2,700–$4,500
Membrane Bonding Adhesive & Lap Sealant	10	kit	$120–$220	$1,200–$2,200
Roof Drains or Scuppers	2	each	$45–$95	$90–$190
Parapet Wall Flashing & Termination Bar	600	linear ft	$5–$12	$3,000–$7,200

Flat Roof Installation en Sunnyvale — Preguntas Frecuentes

What is the best flat roof membrane for NorCal?+

TPO (white) is the most popular choice for NorCal flat roofs. Its high reflectivity meets cool-roof requirements, heat-welded seams are watertight, and it handles Sacramento's UV exposure well. EPDM (rubber) is a good budget alternative.

How long does a flat roof last?+

TPO and EPDM flat roofs last 20-30 years with proper maintenance. Modified bitumen lasts 15-20 years. Regular inspections and debris removal extend the lifespan significantly.

Do flat roofs leak more than sloped roofs?+

Not when properly installed with correct drainage. Flat roofs must have a minimum 1/4-inch-per-foot slope toward drains or scuppers. Ponding water (standing for 48+ hours) is the primary cause of flat roof failures.