Cuanto Cuesta Fascia & Soffit Repair en Salinas, CA? (2026)

Costo Promedio

$3,362–$7,167

Materiales

$2,124–$4,787

Mano de Obra (Monterey Bay)

$462–$726

Las tarifas de mano de obra en Monterey Bay son +10% comparadas con la linea base de Sacramento Metro.

Fascia boards (the vertical trim at the roof edge) and soffits (the horizontal panels under the eave overhang) protect your roof structure from moisture, pests, and weather. Over time, NorCal's wet winters cause fascia to rot, especially behind clogged gutters. Soffit panels can deteriorate or be damaged by animals seeking attic access. Our repair service includes removing damaged sections, treating exposed framing for moisture, installing new primed or PVC fascia and vented soffit panels, and reattaching gutters. PVC and composite materials offer maintenance-free alternatives to wood.

Salinas se encuentra en el condado de Monterey (Monterey Bay). Salad Bowl of the World with diverse neighborhoods from older bungalows to modern subdivisions. El proveedor local de energia es PG&E.

Calculadora de Costos

Ajuste los detalles para obtener su estimado

Ciudad

Linear Feet

Materiales Incluidos

Primed Fascia Board (1x6 or 1x8, per 16 ft)60 board

$720–$1,680

Vented Vinyl Soffit Panel (12" wide, per 12 ft)90 panel

$900–$1,980

J-Channel & F-Channel Trim120 piece

$480–$1,080

Exterior Paint & Primer (quart)1 quart

$12–$25

Stainless Steel Ring-Shank Nails & Screws1 box

$12–$22

Mano de Obra(Monterey Bay +10%)

Carpenter6h @ $55–$88/hr

$330–$528

Painter (touch-up)3h @ $44–$66/hr

$132–$198

Margen del Contratista30%

0%Promedio 30%100%

Materiales

$2,124–$4,787

Mano de Obra

$462–$726

Margen

$776–$1,654

Costo Total Estimado

$3,362 – $7,167

$112–$239 por unidad

Quiere Su Precio Exacto?

Este es un estimado. Obtenga una cotizacion precisa y sin compromiso.

Llamar (916) 476-7689 Cotizacion Gratis

Cronograma del Proyecto

Inspection & Gutter Removal

30-60 min

Inspect the full eave line to determine the extent of damage. Temporarily remove gutters from the affected sections. Probe fascia and sub-fascia for rot.

Damaged Material Removal

1-2 hrs

Remove rotted fascia boards and deteriorated soffit panels. Inspect exposed rafter tails and sheathing for damage. Treat wood framing with a borate-based preservative.

New Fascia & Soffit Installation

2-4 hrs

Install new primed fascia boards (or PVC fascia for maintenance-free performance), fit vented soffit panels with J-channel and F-channel trim, and secure with stainless fasteners.

Gutter Reinstallation & Paint

1-2 hrs

Reinstall gutters with new hangers on the fresh fascia. Apply two coats of exterior paint to wood fascia. Clean up all debris.

Desglose de Materiales

Material	Cantidad	Unidad	Costo Unitario	Total
Primed Fascia Board (1x6 or 1x8, per 16 ft)	60	board	$12–$28	$720–$1,680
Vented Vinyl Soffit Panel (12" wide, per 12 ft)	90	panel	$10–$22	$900–$1,980
J-Channel & F-Channel Trim	120	piece	$4–$9	$480–$1,080
Exterior Paint & Primer (quart)	1	quart	$12–$25	$12–$25
Stainless Steel Ring-Shank Nails & Screws	1	box	$12–$22	$12–$22

Fascia & Soffit Repair en Salinas — Preguntas Frecuentes

How can I tell if my fascia is rotted?+

Look for peeling paint, soft or spongy spots when probed, visible black or brown discoloration, or sections that crumble when touched. Also check for water stains on the soffit below the gutter line.

Should I use wood or PVC fascia?+

PVC (cellular PVC) fascia never rots, doesn't need painting, and resists insects. It costs about 50% more than wood but lasts indefinitely in NorCal's climate. Wood fascia is more affordable and traditional-looking but requires regular painting.

Why is my fascia rotting behind the gutters?+

Clogged gutters overflow backward, soaking the fascia board. Ice dams (rare in NorCal) and worn drip edge also allow water behind the gutter. Proper gutter maintenance and drip edge installation prevent recurring rot.

Do vented soffits improve attic ventilation?+

Yes. Vented soffits provide the intake air that ridge vents or roof vents exhaust. Without soffit ventilation, attic temperatures can exceed 150°F in NorCal summers, damaging shingles from below and increasing cooling costs.