Cuanto Cuesta Electric Vehicle Outlet (NEMA 14-50) en Roseville, CA? (2026)

Costo Promedio

$455–$807

Materiales

$127–$280

Mano de Obra (Placer County)

$223–$341

Las tarifas de mano de obra en Placer County son +5% comparadas con la linea base de Sacramento Metro.

A NEMA 14-50 outlet installation provides a 240V, 50A receptacle in your garage or carport for use with a portable Level 2 EV charger (such as the Tesla Mobile Connector or other plug-in EVSE). This is the most flexible and cost-effective EV charging solution — the outlet can also be used for welders, RV plugs, or other 240V equipment when not charging your vehicle. The installation includes running a dedicated 50A circuit from the panel, installing the NEMA 14-50 receptacle on a sturdy surface-mount box, and verifying proper grounding. This is a more affordable alternative to a hardwired charger and allows you to take your charger with you when traveling.

Roseville se encuentra en el condado de Placer (Placer County). Fast-growing city with master-planned communities from 1990s onward. El proveedor local de energia es Roseville Electric.

Calculadora de Costos

Ajuste los detalles para obtener su estimado

Ciudad

Outlets

Materiales Incluidos

NEMA 14-50R Receptacle (flush or surface mount)1 each

$12–$30

6/3 NM-B Cable (per 50 ft run)1 roll

$90–$180

50A Double-Pole Breaker1 each

$15–$45

Surface-Mount Steel Box & Cover Plate1 each

$10–$25

Mano de Obra(Placer County +5%)

Licensed Electrician2.5h @ $89–$137/hr

$223–$341

Margen del Contratista30%

0%Promedio 30%100%

Materiales

$127–$280

Mano de Obra

$223–$341

Margen

$105–$186

Costo Total Estimado

$455 – $807

Quiere Su Precio Exacto?

Este es un estimado. Obtenga una cotizacion precisa y sin compromiso.

Llamar (916) 476-7689 Cotizacion Gratis

Codigo de Construccion de California

NEC 625 requires a dedicated circuit for EV charging. A NEMA 14-50 outlet must be on a 50A circuit with 6 AWG conductors. The continuous load (EV charging) is rated at 80% of the breaker capacity (40A continuous on a 50A breaker). GFCI protection is built into the portable EVSE device.

Reembolsos Disponibles en Roseville

Los clientes de SMUD pueden calificar para reembolsos en este proyecto. Ver reembolsos de Roseville →

Cronograma del Proyecto

Panel Assessment & Route Planning

15-20 min

Verify the panel has space for a 50A breaker and adequate capacity for the additional load. Plan the cable route from the panel to the garage outlet location, typically through the attic or along the garage wall.

Cable Run & Outlet Installation

1.5-3 hrs

Run 6/3 NM-B cable from the panel to the garage. Mount the surface-mount steel box at the desired height (typically 48 inches) near where the vehicle parks. Install the NEMA 14-50 receptacle.

Breaker Connection & Testing

30-45 min

Install the 50A double-pole breaker, connect the circuit cable, and verify proper voltage (240V), polarity, and grounding with a meter. Test with the EV charger to confirm full charging rate.

Desglose de Materiales

Material	Cantidad	Unidad	Costo Unitario	Total
NEMA 14-50R Receptacle (flush or surface mount)	1	each	$12–$30	$12–$30
6/3 NM-B Cable (per 50 ft run)	1	roll	$90–$180	$90–$180
50A Double-Pole Breaker	1	each	$15–$45	$15–$45
Surface-Mount Steel Box & Cover Plate	1	each	$10–$25	$10–$25

Electric Vehicle Outlet (NEMA 14-50) en Roseville — Preguntas Frecuentes

How much does a NEMA 14-50 outlet cost to install?+

A NEMA 14-50 outlet installation in a NorCal garage costs $500-$1,000 when the panel is in the garage or nearby. If the panel is on the opposite side of the house, longer wire runs can push the cost to $800-$1,500.

NEMA 14-50 outlet vs. hardwired EV charger — which is better?+

A NEMA 14-50 outlet is more flexible and affordable ($500-$1,000 vs. $1,200-$2,500 for hardwired). You can use any plug-in charger and take it with you. A hardwired charger is permanently mounted, typically charges slightly faster, and looks cleaner. Both deliver Level 2 charging.

Can I use a NEMA 14-50 outlet for other things?+

Yes. A NEMA 14-50 is a standard 240V/50A outlet also used for RV plugs, welders, and some workshop equipment. When you're not charging your EV, the outlet is available for other 240V uses.

Is a NEMA 14-50 the same as a dryer outlet?+

No. A dryer typically uses a NEMA 14-30 (30A, 4-prong). A NEMA 14-50 is a 50A, 4-prong outlet with a different pin configuration. EV chargers specifically require the 14-50 for adequate charging current. Do not use an adapter to plug an EV charger into a dryer outlet.