Cuanto Cuesta Condenser Unit Replacement en Davis, CA? (2026)

Costo Promedio

$2,997–$6,162

Materiales

$1,900–$4,160

Mano de Obra (Yolo County)

$405–$580

A condenser unit replacement involves recovering refrigerant from the existing system, disconnecting and removing the old outdoor unit, placing the new condenser on a level pad, connecting refrigerant lines, wiring the electrical disconnect, charging the system, and performing a complete performance test. The condenser is the heart of your AC system — when it fails, your home loses all cooling capability. This estimate covers matched condenser replacements for split-system air conditioners and heat pumps.

Davis se encuentra en el condado de Yolo (Yolo County). College town with diverse housing from 1950s–2020s near UC Davis. El proveedor local de energia es PG&E.

Calculadora de Costos

Ajuste los detalles para obtener su estimado

Ciudad

Condenser units

Materiales Incluidos

Outdoor condenser unit (14-16 SEER2)1 unit

$1,600–$3,500

Condenser pad (if replacement needed)1 each

$45–$120

R-410A refrigerant (full charge)8 lb

$200–$400

Filter drier1 each

$15–$40

Electrical disconnect (if upgrade needed)1 each

$40–$100

Refrigerant line set (if replacement needed)1 set

$120–$260

Mano de Obra

HVAC installer4h @ $80–$115/hr

$320–$460

Electrician1h @ $85–$120/hr

$85–$120

Margen del Contratista30%

0%Promedio 30%100%

Materiales

$1,900–$4,160

Mano de Obra

$405–$580

Margen

$692–$1,422

Costo Total Estimado

$2,997 – $6,162

Quiere Su Precio Exacto?

Este es un estimado. Obtenga una cotizacion precisa y sin compromiso.

Llamar (916) 476-7689 Cotizacion Gratis

Codigo de Construccion de California

California Title 24 requires replacement condensers to meet current minimum efficiency standards (14.3 SEER2 for split systems). A mechanical permit and inspection are required. Electrical disconnect must be within sight of the unit.

Cronograma del Proyecto

Refrigerant recovery & disconnection

30-60 minutes

Recover existing refrigerant into an approved tank, disconnect electrical wiring from the disconnect box, and detach the refrigerant lines from the old condenser.

Old unit removal & pad preparation

30-60 minutes

Remove the old condenser from the pad, inspect and level the concrete pad (replace if cracked or uneven), and clean the installation area.

New condenser installation

2-3 hours

Place the new condenser on the pad, connect the suction and liquid refrigerant lines (braze if needed), install the new filter drier, and wire the electrical disconnect.

Evacuation, charging & testing

1-2 hours

Evacuate the refrigerant lines, charge the system by weight, verify subcooling and superheat, measure amperage, test the contactor and capacitor, and confirm proper cooling performance.

Desglose de Materiales

Material	Cantidad	Unidad	Costo Unitario	Total
Outdoor condenser unit (14-16 SEER2)	1	unit	$1600–$3500	$1,600–$3,500
Condenser pad (if replacement needed)	1	each	$45–$120	$45–$120
R-410A refrigerant (full charge)	8	lb	$25–$50	$200–$400
Filter drier	1	each	$15–$40	$15–$40
Electrical disconnect (if upgrade needed)	1	each	$40–$100	$40–$100
Refrigerant line set (if replacement needed)	1	set	$120–$260	$120–$260

Condenser Unit Replacement en Davis — Preguntas Frecuentes

How do I know if my condenser needs replacement?+

Signs include the compressor not starting, loud grinding or rattling noises, refrigerant leaks from the coil that cannot be repaired, the unit tripping the breaker, or age over 12-15 years with declining performance.

Can I just replace the condenser without replacing the indoor coil?+

You can, but the new condenser must be compatible with your existing indoor coil for proper refrigerant metering and efficiency ratings. A mismatched system will underperform and may not qualify for warranty coverage.

How long does condenser replacement take?+

A straightforward condenser replacement typically takes 4-6 hours. If the line set or electrical circuit also needs replacement, the project may take a full day.

What's the difference between a condenser and a compressor?+

The condenser is the entire outdoor unit, which includes the compressor, condenser coil, fan motor, and electrical components. The compressor is the pump inside the condenser that circulates refrigerant. Sometimes only the compressor fails, but it's often more cost-effective to replace the entire condenser.