Cuanto Cuesta Chain Link Fence Installation en Turlock, CA? (2026)

Costo Promedio

$108,760–$189,973

Materiales

$86,075–$150,535

Mano de Obra (San Joaquin Valley)

$933–$1,443

Las tarifas de mano de obra en San Joaquin Valley son -8% comparadas con la linea base de Sacramento Metro.

Chain link fencing is the most cost-effective way to enclose a yard, dog run, or commercial lot. This estimate covers setting galvanized steel terminal and line posts in concrete, stretching diamond-weave fabric, and installing tension bars, bands, and a walk gate. Vinyl-coated options in black or green blend better with landscaping. Pricing reflects NorCal supplier rates for 2025-2026.

Turlock se encuentra en el condado de Stanislaus (San Joaquin Valley). University town with affordable housing near CSU Stanislaus. El proveedor local de energia es TID.

Calculadora de Costos

Ajuste los detalles para obtener su estimado

Ciudad

Linear feet of fence

Materiales Incluidos

Terminal posts (2-3/8 in, galvanized)900 each

$16,200–$28,800

Line posts (1-5/8 in, galvanized)2250 each

$22,500–$40,500

Chain link fabric (4 ft × 50 ft roll)450 roll

$29,250–$49,500

Tension bars, bands & ties kit1 kit

$40–$75

Top rail (1-3/8 in × 10.5 ft)2250 each

$18,000–$31,500

Walk gate (4 ft, galvanized)1 each

$85–$160

Mano de Obra(San Joaquin Valley -8%)

Fence Installer18h @ $35–$53/hr

$629–$960

General Laborer15h @ $20–$32/hr

$304–$483

Margen del Contratista25%

0%Promedio 30%100%

Materiales

$86,075–$150,535

Mano de Obra

$933–$1,443

Margen

$21,752–$37,995

Costo Total Estimado

$108,760 – $189,973

$725–$1,266 por unidad

Quiere Su Precio Exacto?

Este es un estimado. Obtenga una cotizacion precisa y sin compromiso.

Llamar (916) 476-7689 Cotizacion Gratis

Codigo de Construccion de California

Chain link fences over 6 feet may require a permit. Barbed wire tops are typically prohibited in residential zones.

Cronograma del Proyecto

Layout & Utility Locating

0.5 day

Mark fence line, call 811 for underground utility locates, and stake post positions every 10 feet.

Post Setting

1–2 days

Dig or auger holes 24–30 inches deep, set terminal and line posts in concrete, and brace until cured.

Fabric Stretching & Top Rail

1–2 days

Install top rail, unroll chain link fabric, and stretch taut using a come-along tool. Attach with tension bars and tie wires.

Gate Hanging & Cleanup

0.5 day

Hang walk gate, install latch hardware, trim excess fabric, and remove all debris from site.

Desglose de Materiales

Material	Cantidad	Unidad	Costo Unitario	Total
Terminal posts (2-3/8 in, galvanized)	900	each	$18–$32	$16,200–$28,800
Line posts (1-5/8 in, galvanized)	2250	each	$10–$18	$22,500–$40,500
Chain link fabric (4 ft × 50 ft roll)	450	roll	$65–$110	$29,250–$49,500
Tension bars, bands & ties kit	1	kit	$40–$75	$40–$75
Top rail (1-3/8 in × 10.5 ft)	2250	each	$8–$14	$18,000–$31,500
Walk gate (4 ft, galvanized)	1	each	$85–$160	$85–$160

Chain Link Fence Installation en Turlock — Preguntas Frecuentes

How much does chain link fencing cost per foot in NorCal?+

Including materials and labor, expect $12–$25 per linear foot for a 4-foot residential chain link fence, or $18–$35 per foot for 6-foot height.

Is vinyl-coated chain link worth the extra cost?+

Vinyl coating adds about 15–25% to the material cost but significantly improves appearance and corrosion resistance, making it worthwhile for front yards.

Can I add privacy slats later?+

Yes. Aluminum or plastic slats can be woven into the fabric at any time, adding about $3–$6 per linear foot.