How Much Does Sprinkler System Installation Cost in Lemoore, CA? (2026)

Average Cost

$2,624–$5,815

Materials

$1,184–$3,242

Labor (Tulare County)

$915–$1,410

A full sprinkler system installation includes trenching, laying PVC mainline and lateral pipes, installing pop-up spray heads and rotors in optimized zones, connecting a backflow preventer, and programming a smart irrigation controller. Proper zone design ensures even coverage while minimizing water waste. This estimate uses Sacramento-area pricing for 2025-2026.

Sacramento's hot, dry summers require efficient irrigation. Smart controllers with weather-based scheduling can reduce water use by 20-40% compared to fixed timers, helping comply with local water conservation ordinances.

Lemoore is located in Kings County (Tulare County). Military-adjacent city near NAS Lemoore with affordable newer housing. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Irrigation zones

Materials Included

Smart irrigation controller (WiFi)1 each

$120–$280

Pop-up spray heads / rotors48 each

$192–$864

PVC pipe (3/4" & 1" schedule 40)600 linear ft

$300–$720

Zone control valves (1")36 each

$432–$1,008

Backflow preventer (PVB or RP)1 each

$80–$220

Fittings, risers, clamps, wire1 lot

$60–$150

Labor

Irrigation technician12h @ $50–$80/hr

$600–$960

Laborer / trenching9h @ $35–$50/hr

$315–$450

Contractor Markup25%

0%Avg 30%100%

Materials

$1,184–$3,242

Labor

$915–$1,410

Markup

$525–$1,163

Estimated Total Cost

$2,624 – $5,815

$437–$969 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

Project Timeline

Design & zone mapping

1-2 hours

Measure the yard, identify plant types and sun exposure, and design irrigation zones for optimal coverage and water efficiency.

Trenching & mainline installation

3-6 hours

Trench 8-12 inches deep, lay PVC mainline from the water source, install the backflow preventer and valve manifold.

Lateral piping & head installation

4-8 hours

Run lateral lines to each zone, install spray heads and rotors at designed spacing, and connect drip lines for planter beds.

Controller wiring & programming

1-2 hours

Run valve wires to the controller, program watering schedules for each zone, and connect WiFi for smart weather-based adjustments.

System testing & adjustment

1-2 hours

Flush lines, pressure-test for leaks, adjust head spray patterns, and verify full coverage zone by zone. Backfill trenches and restore landscape.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Smart irrigation controller (WiFi)	1	each	$120–$280	$120–$280
Pop-up spray heads / rotors	48	each	$4–$18	$192–$864
PVC pipe (3/4" & 1" schedule 40)	600	linear ft	$0.5–$1.2	$300–$720
Zone control valves (1")	36	each	$12–$28	$432–$1,008
Backflow preventer (PVB or RP)	1	each	$80–$220	$80–$220
Fittings, risers, clamps, wire	1	lot	$60–$150	$60–$150

Sprinkler System Installation in Lemoore — FAQ

How many sprinkler zones does my yard need?+

Most Sacramento-area homes need 4-8 zones depending on yard size, plant types, and sun/shade areas. A typical 1/4-acre lot with front and back lawns plus planter beds uses about 6 zones.

Do I need a permit for sprinkler installation?+

Sacramento County requires a backflow preventer on all irrigation systems. Some jurisdictions require a plumbing permit if you're connecting to the main water line. Your installer should verify local requirements.

How long does a sprinkler system installation take?+

A typical 6-zone system takes 1-2 days. Larger properties or systems requiring extensive trenching may take up to 3 days.

What maintenance does a sprinkler system need?+

Seasonal adjustments, annual head cleaning, and winterization (though Sacramento rarely freezes). Check for broken heads after mowing, and flush filters on drip zones annually.