How Much Does Single Garage Door Installation Cost in Manteca, CA? (2026)

Average Cost

$1,366–$2,951

Materials

$775–$1,870

Labor (San Joaquin Valley)

$276–$400

Labor rates in San Joaquin Valley are -8% compared to Sacramento Metro baseline.

A single garage door installation replaces your old or damaged one-car garage door with a new insulated or non-insulated steel, aluminum, or wood door. The project includes removing the old door and hardware, installing new vertical and horizontal tracks, torsion springs sized for the door weight, hinges, rollers, and weatherstripping. In the Sacramento area, insulated doors (R-value 6.5 or higher) are recommended to reduce heat transfer in summer and keep the garage comfortable year-round. Standard single-car openings are 8x7 or 9x7 feet.

Manteca is located in San Joaquin County (San Joaquin Valley). Growing city with affordable newer housing and agricultural heritage. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Doors

Materials Included

Single Garage Door (9x7, insulated steel)1 unit

$600–$1,500

Track Set (vertical & horizontal, galvanized)1 set

$60–$120

Torsion Spring Set (rated for door weight)1 set

$55–$120

Hinges, Rollers, Brackets & Cables1 kit

$40–$85

Bottom Seal & Side Weatherstripping1 set

$20–$45

Labor(San Joaquin Valley -8%)

Garage Door Technician3h @ $60–$87/hr

$179–$262

Helper3h @ $32–$46/hr

$97–$138

Contractor Markup30%

0%Avg 30%100%

Materials

$775–$1,870

Labor

$276–$400

Markup

$315–$681

Estimated Total Cost

$1,366 – $2,951

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

California Building Code requires garage doors to meet wind load requirements for the region. Doors between the garage and living space must be fire-rated (20-minute minimum). Automatic openers must include safety reversing sensors per UL 325.

Project Timeline

Old Door Removal

30-45 min

Release spring tension, disconnect the opener, remove door panels section by section, and take down old tracks, springs, and hardware. Inspect the header and jambs for damage.

Track & Hardware Installation

45-60 min

Install the new vertical tracks on both sides, attach the flag brackets to the header, and hang the horizontal tracks. Install the torsion spring assembly on the header bracket.

Door Panel Assembly

45-60 min

Stack and hinge each door panel starting from the bottom, install rollers in the track, attach lift cables, and connect the top bracket to the horizontal track.

Spring Tensioning & Testing

30-45 min

Wind the torsion springs to the correct number of turns for the door weight, attach the opener arm, test balance by lifting the door halfway (it should stay in place), and verify safety reverse function.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Single Garage Door (9x7, insulated steel)	1	unit	$600–$1500	$600–$1,500
Track Set (vertical & horizontal, galvanized)	1	set	$60–$120	$60–$120
Torsion Spring Set (rated for door weight)	1	set	$55–$120	$55–$120
Hinges, Rollers, Brackets & Cables	1	kit	$40–$85	$40–$85
Bottom Seal & Side Weatherstripping	1	set	$20–$45	$20–$45

Single Garage Door Installation in Manteca — FAQ

How much does a single garage door cost installed?+

A basic insulated steel single garage door runs $900-$2,000 installed in the Sacramento area. Premium carriage-style or wood doors range from $2,000-$4,000 including all hardware and labor.

Should I get an insulated garage door?+

Yes, especially in Sacramento's climate. Insulated doors (R-6.5 to R-18) keep the garage 10-20 degrees cooler in summer and warmer in winter. They're also quieter and more durable than non-insulated doors.

How long does garage door installation take?+

A single garage door replacement takes 2-4 hours including old door removal. A new installation (no existing door) takes 3-5 hours.

What garage door material is best for NorCal?+

Insulated steel is the most popular choice — it resists warping, requires minimal maintenance, and handles Sacramento's heat well. Wood is beautiful but needs regular staining/sealing. Aluminum is lightweight and rust-resistant.