How Much Does Bidet Installation Cost in San Francisco, CA? (2026)

Average Cost

$603–$1,273

Materials

$272–$695

Labor (San Francisco)

$192–$284

Labor rates in San Francisco are +35% compared to Sacramento Metro baseline.

Bidet installations in NorCal range from simple T-adapter bidet seats (done in under an hour) to full standalone bidet fixtures requiring dedicated hot/cold supply lines and a drain connection. Electric bidet seats (e.g., TOTO Washlet, Brondell) need a nearby GFCI outlet — if one doesn't exist, we coordinate with an electrician. Our plumbers ensure all connections meet code and test for leaks before finishing.

San Francisco is located in San Francisco County (San Francisco). Iconic fog city with Victorian painted ladies, Edwardian flats, and modern high-rises. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Bidets

Materials Included

Electric Bidet Seat (TOTO Washlet or equiv.)1 unit

$250–$650

T-Adapter & Braided Supply Line1 set

$12–$25

Mounting Plate & Hardware Kit1 kit

$10–$20

GFCI Outlet Installation (if needed)1 unit

$80–$180

Labor(San Francisco +35%)

Licensed Plumber1.5h @ $128–$189/hr

$192–$284

Contractor Markup30%

0%Avg 30%100%

Materials

$272–$695

Labor

$192–$284

Markup

$139–$294

Estimated Total Cost

$603 – $1,273

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

California Plumbing Code requires an air gap or approved backflow preventer on bidet water supplies. Electric bidet seats must be plugged into a GFCI-protected outlet per NEC.

Project Timeline

Assessment & Preparation

15-20 min

Inspect existing toilet, water supply valve, and electrical outlet availability. Shut off water and drain the toilet tank.

Supply Line & Seat Installation

30-45 min

Install the T-adapter on the toilet fill valve, route the bidet supply line, remove the existing toilet seat, and mount the bidet seat or attachment.

Testing & Adjustment

15-20 min

Restore water supply, check all connections for leaks, power on the bidet seat, test spray functions, adjust water pressure and temperature settings.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Electric Bidet Seat (TOTO Washlet or equiv.)	1	unit	$250–$650	$250–$650
T-Adapter & Braided Supply Line	1	set	$12–$25	$12–$25
Mounting Plate & Hardware Kit	1	kit	$10–$20	$10–$20
GFCI Outlet Installation (if needed)	1	unit	$80–$180	$80–$180

Bidet Installation in San Francisco — FAQ

Do I need a plumber for a bidet seat installation?+

Simple T-adapter bidet seats can be DIY, but hiring a plumber ensures leak-free connections and proper GFCI outlet verification. A plumber is recommended if you need a new outlet or hot water supply line.

Will a bidet seat fit my toilet?+

Most bidet seats fit standard elongated toilets. Round bowls have fewer options. We measure your toilet before ordering to confirm compatibility.

Do electric bidet seats require a dedicated circuit?+

Most bidet seats draw 1,000-1,400 watts and can share a 15A GFCI circuit if nothing else is on it. A nearby bathroom GFCI outlet within 3 feet of the toilet is ideal.