Toilet Keeps Running in 93258 (Porterville, CA)
A running toilet isn't an emergency, but it wastes significant water — up to 200 gallons per day. Fix it promptly to avoid a high water bill. If water is overflowing onto the floor, that's urgent.
A running toilet is usually caused by a worn flapper valve, a faulty fill valve, or an improperly adjusted float. A worn flapper is the most common cause and costs $5–$15 to replace yourself. If the toilet runs constantly, it can waste 200+ gallons per day. Professional repair costs $100–$250 if DIY isn't an option.
Common Causes in 93258
- •Worn Flapper Valve — The rubber flapper at the bottom of the tank seals water between flushes. Over time it warps, cracks, or accumulates mineral deposits, allowing water to seep into the bowl constantly.
- •Faulty Fill Valve — The fill valve controls water refilling the tank after a flush. A worn valve can fail to shut off completely, causing continuous running.
- •Float Adjusted Too High — If the float is set too high, water rises above the overflow tube and drains continuously. Adjusting the float level down fixes this.
- •Overflow Tube Issue — A cracked overflow tube or one that's too short allows water to constantly drain from the tank into the bowl.
- •Flush Valve Seat Damage — The surface where the flapper seats can become rough or corroded, preventing a proper seal even with a new flapper.
When to Call a Pro in Porterville
- ✓ You've replaced the flapper and the toilet still runs
- ✓ Water is leaking from the base of the toilet
- ✓ The toilet rocks or wobbles on the floor
- ✓ You hear constant running and can't identify the source
- ✓ Multiple toilets are running (may indicate a pressure issue)