How Much Does Wrought Iron Fence Installation Cost in Corning, CA? (2026)

Average Cost

$165,902–$339,050

Materials

$126,040–$258,290

Labor (Far North)

$1,577–$2,518

Labor rates in Far North are -12% compared to Sacramento Metro baseline.

Wrought iron fencing provides security and timeless curb appeal for front yards, pools, and estates. This estimate covers setting steel posts in concrete, installing pre-fabricated ornamental panels, and welding custom connections where needed. Modern wrought iron uses galvanized and powder-coated steel for rust resistance. Pricing reflects NorCal fabrication and installation rates.

Corning is located in Tehama County (Far North). Olive City with small-town affordable housing. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Linear feet of fence

Materials Included

Ornamental steel panels (6 ft × 8 ft)800 each

$88,000–$176,000

Steel fence posts (2.5 in × 8 ft)880 each

$22,000–$48,400

Quick-set concrete (50 lb bag)1760 bag

$8,800–$14,080

Ornamental walk gate with hinges1 each

$200–$450

Decorative post finials880 each

$7,040–$19,360

Labor(Far North -12%)

Iron Fence Installer24h @ $44–$70/hr

$1,056–$1,690

Welder6.4h @ $48–$79/hr

$310–$507

General Laborer9.6h @ $22–$33/hr

$211–$321

Contractor Markup30%

0%Avg 30%100%

Materials

$126,040–$258,290

Labor

$1,577–$2,518

Markup

$38,285–$78,242

Estimated Total Cost

$165,902 – $339,050

$2,074–$4,238 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

Pool-adjacent iron fences must be at least 60 inches tall with no more than 4-inch spacing between pickets per California Building Code.

Project Timeline

Design & Layout

1 day

Confirm fence design, measure the perimeter, verify property lines, and order custom panels if needed.

Post Setting

1–2 days

Dig post holes 30–36 inches deep, set steel posts plumb in concrete, and allow 24-hour cure.

Panel Installation

2–3 days

Mount panels between posts using brackets, weld any custom connections, and install the walk gate.

Touch-up & Cleanup

0.5 day

Apply touch-up paint to any welded joints, install finials, and remove debris from site.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Ornamental steel panels (6 ft × 8 ft)	800	each	$110–$220	$88,000–$176,000
Steel fence posts (2.5 in × 8 ft)	880	each	$25–$55	$22,000–$48,400
Quick-set concrete (50 lb bag)	1760	bag	$5–$8	$8,800–$14,080
Ornamental walk gate with hinges	1	each	$200–$450	$200–$450
Decorative post finials	880	each	$8–$22	$7,040–$19,360

Wrought Iron Fence Installation in Corning — FAQ

What is the difference between wrought iron and ornamental steel?+

True wrought iron is hand-forged and very expensive. Most modern 'wrought iron' fences are actually tubular steel with a powder-coated finish that mimics the classic look at a fraction of the cost.

Will wrought iron rust in NorCal's wet winters?+

Galvanized and powder-coated steel resists rust for 15–20 years. Periodic touch-up painting at weld joints extends the lifespan further.

Is wrought iron fencing required around pools?+

Yes. California code requires pool fencing at least 5 feet tall with self-closing, self-latching gates. Wrought iron meets this requirement and provides unobstructed sightlines.