How Much Does Wood Privacy Fence Installation Cost in Grass Valley, CA? (2026)

Average Cost

$141,025–$296,600

Materials

$111,445–$235,085

Labor (Gold Country)

$1,375–$2,195

A wood privacy fence adds security, curb appeal, and property-line definition to your home. This estimate covers setting pressure-treated or cedar posts in concrete, attaching horizontal rails, and installing dog-ear or board-on-board pickets. In NorCal, redwood and cedar are the preferred species because they naturally resist rot and termites in our Mediterranean climate. The estimate scales by linear feet of fence line.

NorCal's dry summers and wet winters cause wood to expand and contract. Use kiln-dried lumber and apply sealant within 60 days of installation.

Grass Valley is located in Nevada County (Gold Country). Gold Rush mountain town with historic homes and newer foothill developments. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Linear feet of fence

Materials Included

4×4 pressure-treated posts (8 ft)1300 each

$15,600–$28,600

2×4 cedar rails (8 ft)3800 each

$22,800–$45,600

1×6 cedar dog-ear pickets (6 ft)20000 each

$60,000–$140,000

Quick-set concrete (50 lb bag)2600 bag

$13,000–$20,800

Screws, brackets & hardware kit1 kit

$45–$85

Decorative post caps1300 each

$5,200–$15,600

Labor

Fence Installer25h @ $40–$65/hr

$1,000–$1,625

General Laborer15h @ $25–$38/hr

$375–$570

Contractor Markup25%

0%Avg 30%100%

Materials

$111,445–$235,085

Labor

$1,375–$2,195

Markup

$28,205–$59,320

Estimated Total Cost

$141,025 – $296,600

$1,410–$2,966 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

Fences over 6 feet require a building permit in most NorCal jurisdictions. Corner-lot fences near intersections must meet sight-triangle setback rules.

Project Timeline

Site Survey & Utility Marking

1 day

Measure property lines, mark underground utilities (call 811), and flag post locations every 8 feet.

Post Hole Digging & Setting

1–2 days

Auger post holes 24–36 inches deep, set posts plumb in quick-set concrete, and let cure overnight.

Rail & Picket Installation

2–3 days

Attach horizontal rails between posts and fasten pickets with corrosion-resistant screws.

Finishing & Cleanup

1 day

Install post caps, apply sealant or stain if requested, and haul away all debris.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
4×4 pressure-treated posts (8 ft)	1300	each	$12–$22	$15,600–$28,600
2×4 cedar rails (8 ft)	3800	each	$6–$12	$22,800–$45,600
1×6 cedar dog-ear pickets (6 ft)	20000	each	$3–$7	$60,000–$140,000
Quick-set concrete (50 lb bag)	2600	bag	$5–$8	$13,000–$20,800
Screws, brackets & hardware kit	1	kit	$45–$85	$45–$85
Decorative post caps	1300	each	$4–$12	$5,200–$15,600

Wood Privacy Fence Installation in Grass Valley — FAQ

How long does a cedar privacy fence last in NorCal?+

With proper maintenance (sealing every 2–3 years), a cedar fence in the Sacramento Valley typically lasts 15–25 years.

Do I need a permit for a 6-foot fence?+

Most NorCal cities allow a 6-foot backyard fence without a permit, but front-yard fences over 3–4 feet usually require one. Check with your local planning department.

What is the difference between dog-ear and board-on-board?+

Dog-ear fences have pickets side by side with visible gaps when the wood shrinks. Board-on-board overlaps pickets for complete privacy and costs about 15–20% more in materials.

Should I use redwood or cedar?+

Both resist rot naturally. Redwood is more readily available in NorCal and often slightly cheaper locally. Cedar has a tighter grain and can be more uniform in appearance.