How Much Does TV Mounting Cost in San Francisco, CA? (2026)

Average Cost

$200–$421

Materials

$43–$152

Labor (San Francisco)

$111–$172

Labor rates in San Francisco are +35% compared to Sacramento Metro baseline.

Professional TV mounting ensures your flat-screen is securely anchored to wall studs, leveled perfectly, and wired cleanly. We install fixed, tilting, and full-motion articulating mounts for TVs from 32 to 85+ inches. Standard installation includes locating studs, drilling pilot holes, securing the mount plate with lag bolts, hanging and leveling the TV, and basic cable management with cord covers. For a premium finish, we can run HDMI and power cables through the wall with a recessed outlet kit (code-compliant low-voltage wiring). We also set up the TV input, connect streaming devices, and mount a soundbar if needed.

San Francisco is located in San Francisco County (San Francisco). Iconic fog city with Victorian painted ladies, Edwardian flats, and modern high-rises. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

TVs

Materials Included

TV Wall Mount Bracket (full-motion articulating)1 unit

$30–$120

Lag Bolts & Wall Anchors1 kit

$5–$12

Cord Cover / Cable Raceway (paintable, 4 ft)1 kit

$8–$20

In-Wall Cable Management Kit (recessed outlet + HDMI pass-through)1 kit

$25–$55

Labor(San Francisco +35%)

Handyman1.5h @ $74–$115/hr

$111–$172

Contractor Markup30%

0%Avg 30%100%

Materials

$43–$152

Labor

$111–$172

Markup

$46–$97

Estimated Total Cost

$200 – $421

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

Running standard (non-low-voltage) power cables loose inside walls is a fire code violation per NEC. Power must be delivered via a recessed outlet or surface-mounted cord cover. Low-voltage cables (HDMI, ethernet) can be run through the wall without conduit.

Project Timeline

Location & Stud Finding

10-15 min

Determine optimal viewing height and position with the homeowner, locate wall studs with an electronic stud finder, and mark the mounting holes. Check for hidden wiring and plumbing behind the wall.

Mount Installation

20-30 min

Drill pilot holes into studs, secure the mount plate with lag bolts rated for the TV weight, and verify the mount is level and tight.

TV Hanging & Cable Management

20-30 min

Attach the mounting arms to the TV, hang the TV on the wall plate, level and tighten all connections, and install the cord cover or in-wall cable kit for a clean look.

Setup & Testing

10-15 min

Connect HDMI cables, power, and streaming devices. Test the mount's tilt and swivel range. Verify the TV is secure with a gentle pull test.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
TV Wall Mount Bracket (full-motion articulating)	1	unit	$30–$120	$30–$120
Lag Bolts & Wall Anchors	1	kit	$5–$12	$5–$12
Cord Cover / Cable Raceway (paintable, 4 ft)	1	kit	$8–$20	$8–$20
In-Wall Cable Management Kit (recessed outlet + HDMI pass-through)	1	kit	$25–$55	$25–$55

TV Mounting in San Francisco — FAQ

How much does TV mounting cost?+

Basic TV mounting (bracket + external cord cover) costs $150-$300 in the Sacramento area. In-wall cable concealment adds $75-$150. Mounting above a fireplace or on brick/stone adds $50-$100 for masonry anchoring.

What height should I mount my TV?+

The center of the screen should be at seated eye level — typically 42-48 inches from the floor for a standard living room. Above a fireplace, the TV will be higher, so a tilting mount is recommended to angle the screen down.

Can you mount a TV on any wall?+

TVs must be mounted into wall studs or a plywood backer for safe support. Drywall alone cannot hold a TV. For brick, concrete, or stone walls, we use masonry anchors rated for the TV weight.

Can you hide the TV wires inside the wall?+

Yes. We use a code-compliant in-wall cable management kit that includes a recessed outlet behind the TV and a low-voltage pass-through for HDMI cables. Running standard power cords loose inside the wall is a fire code violation — the recessed outlet kit is the proper solution.