How Much Does Toilet Replacement Cost in Chico, CA? (2026)

Average Cost

$341–$859

Materials

$188–$546

Labor (North Valley)

$74–$115

Labor rates in North Valley are -10% compared to Sacramento Metro baseline.

A toilet replacement is a straightforward swap of the old toilet for a new high-efficiency model. Our handyman service covers removing the old toilet, inspecting the flange for damage, installing a new wax ring or wax-free gasket, setting the new toilet, connecting the water supply, and caulking the base. We install standard two-piece toilets, one-piece units, and comfort-height (ADA) models. California requires all new toilets to be WaterSense certified at 1.28 GPF or less. If the flange is damaged or the plumbing requires modification, we refer to a licensed plumber.

Chico is located in Butte County (North Valley). College town (CSU Chico) with craftsman bungalows and newer suburban growth. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Toilets

Materials Included

WaterSense Toilet (1.28 GPF, two-piece)1 unit

$150–$450

Wax Ring with Flange Bolts1 set

$5–$15

Braided Stainless Supply Line (3/8" x 12")1 each

$8–$16

Slow-Close Toilet Seat1 each

$20–$55

Silicone Caulk (kitchen & bath)1 tube

$5–$10

Labor(North Valley -10%)

Handyman1.5h @ $50–$77/hr

$74–$115

Contractor Markup30%

0%Avg 30%100%

Materials

$188–$546

Labor

$74–$115

Markup

$79–$198

Estimated Total Cost

$341 – $859

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

California Green Building Standards require WaterSense-certified toilets (1.28 GPF max) for all new installations. The toilet base must be caulked to the floor per California Plumbing Code.

Project Timeline

Old Toilet Removal

20-30 min

Shut off the water supply valve, flush and sponge out remaining water, disconnect the supply line, unbolt the toilet from the flange, and remove it. Stuff a rag in the drain to block sewer gas.

Flange Inspection & Prep

10-15 min

Inspect the closet flange for cracks or improper height. Clean old wax residue and verify the flange sits flush with or slightly above the finished floor. Minor repairs can be handled on-site.

New Toilet Installation

30-40 min

Set a new wax ring on the flange, lower the toilet onto the bolts, press to seat the seal, tighten flange bolts evenly (alternating sides), and connect the supply line.

Testing & Finishing

15-20 min

Turn on water supply, fill the tank, flush multiple times to check for leaks at the base and supply connection. Apply silicone caulk around the base and install the seat.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
WaterSense Toilet (1.28 GPF, two-piece)	1	unit	$150–$450	$150–$450
Wax Ring with Flange Bolts	1	set	$5–$15	$5–$15
Braided Stainless Supply Line (3/8" x 12")	1	each	$8–$16	$8–$16
Slow-Close Toilet Seat	1	each	$20–$55	$20–$55
Silicone Caulk (kitchen & bath)	1	tube	$5–$10	$5–$10

Toilet Replacement in Chico — FAQ

How much does toilet replacement cost?+

A basic toilet replacement in the Sacramento area runs $250-$500 including the toilet, parts, and labor. Comfort-height or one-piece models bring the total to $400-$800.

Do I need a plumber or can a handyman replace a toilet?+

A handyman can handle a straightforward toilet swap if the flange and plumbing are in good condition. If the flange is broken, the floor is rotted, or the drain needs modification, a licensed plumber is required.

How long does it take to replace a toilet?+

A simple toilet swap takes about 1-1.5 hours. If the flange needs repair or the shutoff valve needs replacement, allow an extra 30-60 minutes.

What toilet should I buy?+

TOTO Drake, American Standard Champion, and Kohler Highline are excellent mid-range options that flush well with Sacramento's hard water. Look for WaterSense certification and a glazed trapway for easier maintenance.