How Much Does Subfloor Repair & Replacement Cost in Rio Vista, CA? (2026)

Average Cost

$1,661–$2,929

Materials

$729–$1,365

Labor (Solano County)

$600–$978

A damaged subfloor causes squeaks, soft spots, and can compromise any flooring installed on top. This estimate covers removing the finish floor, cutting out damaged plywood or OSB, sistering floor joists if needed, installing new subfloor panels, and preparing the surface for new flooring. Water damage from leaks and plumbing failures is the most common cause in NorCal homes. Pricing per 4×8 sheet (32 sq ft) of subfloor replaced.

Rio Vista is located in Solano County (Solano County). Delta town with retirement communities and older homes. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Sheets of subfloor (4×8 ft)

Materials Included

3/4-inch tongue-and-groove plywood (4×8)16 sheet

$560–$1,040

Subfloor screws (2-1/2 inch, 1 lb box)8 box

$64–$120

Subfloor adhesive (28 oz tube)16 tube

$80–$160

2×10 or 2×12 joist lumber (sistering)8 each

$96–$224

Self-leveling compound (50 lb bag)1 bag

$25–$45

Labor

Carpenter10h @ $45–$75/hr

$450–$750

General Laborer6h @ $25–$38/hr

$150–$228

Contractor Markup25%

0%Avg 30%100%

Materials

$729–$1,365

Labor

$600–$978

Markup

$332–$586

Estimated Total Cost

$1,661 – $2,929

$415–$732 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

Project Timeline

Finish Floor Removal

0.5–1 day

Remove carpet, tile, or hardwood over the damaged area to expose the subfloor. Set aside reusable materials.

Damage Assessment

0.5 day

Probe for rot, check moisture levels, inspect floor joists for damage, and mark the area to be cut out. Identify and fix the source of water damage if present.

Subfloor Replacement

1–2 days

Cut out damaged subfloor, sister any weakened joists with new lumber, glue and screw new T&G plywood, and level the surface.

Prep for New Flooring

0.5 day

Apply self-leveling compound as needed, check flatness, and leave the subfloor ready for the new finish floor installation.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
3/4-inch tongue-and-groove plywood (4×8)	16	sheet	$35–$65	$560–$1,040
Subfloor screws (2-1/2 inch, 1 lb box)	8	box	$8–$15	$64–$120
Subfloor adhesive (28 oz tube)	16	tube	$5–$10	$80–$160
2×10 or 2×12 joist lumber (sistering)	8	each	$12–$28	$96–$224
Self-leveling compound (50 lb bag)	1	bag	$25–$45	$25–$45

Subfloor Repair & Replacement in Rio Vista — FAQ

How do I know if my subfloor needs repair?+

Signs include soft or spongy spots when walking, persistent squeaking, visible water stains on the ceiling below, or a musty smell indicating mold or rot underneath.

Can I install new flooring over a damaged subfloor?+

No. A damaged subfloor will cause any new flooring to fail prematurely — tiles will crack, hardwood will buckle, and LVP will develop soft spots. Always fix the subfloor first.

How much does subfloor repair cost?+

In NorCal, subfloor repair typically costs $250–$500 per 4×8 sheet replaced, including materials and labor. Joist repairs add $100–$300 per joist.

Does insurance cover subfloor damage?+

If the damage resulted from a covered peril (sudden pipe burst, appliance overflow), homeowners insurance typically covers it. Gradual leaks and deferred maintenance are usually excluded.