How Much Does Small Tree Removal Cost in Loomis, CA? (2026)
Average Cost
$355–$710
Materials
$150–$355
Labor (Placer County)
$134–$213
Labor rates in Placer County are +5% compared to Sacramento Metro baseline.
Small tree removal covers trees under 25 feet tall and up to 12 inches in trunk diameter. The process includes felling or sectional cutting, chipping branches into mulch, hauling debris, and optional stump grinding. Small trees near fences, power lines, or structures may require sectional removal for safety. This estimate uses Sacramento-area pricing for 2025-2026.
Loomis is located in Placer County (Placer County). Small-town feel with larger rural lots and equestrian properties. The local utility provider is PG&E.
Cost Calculator
Adjust details to get your estimate
Materials Included
Labor(Placer County +5%)
Materials
$150–$355
Labor
$134–$213
Markup
$71–$142
Estimated Total Cost
$355 – $710
Want Your Exact Price?
This is an estimate. Get a precise, no-obligation quote from licensed contractors.
California Building Code
CAL FIRE requires 100 ft of defensible space around structures in wildfire-prone areas of Sacramento County. Small dead or hazardous trees within this zone should be removed promptly.
Project Timeline
Site assessment & safety setup
15-30 minutesEvaluate the tree's lean, nearby structures, and overhead lines. Set up safety cones, caution tape, and ground protection.
Tree cutting & sectional removal
30-90 minutesFell the tree in a safe direction or section it from the top down if space is limited. Lower branches with ropes when near structures.
Chipping & debris cleanup
30-60 minutesFeed branches through the chipper, cut trunk sections for haul-off, and rake the site clean.
Stump grinding (if included)
20-40 minutesGrind the stump 6-12 inches below grade, backfill with grindings, and level the area for future planting or landscaping.
Materials Breakdown
| Material | Qty | Unit | Unit Cost | Total |
|---|---|---|---|---|
| Chainsaw fuel, bar oil & blades | 1 | per tree | $10–$25 | $10–$25 |
| Debris haul-off (dump fees) | 1 | load | $50–$120 | $50–$120 |
| Stump grinding (optional add-on) | 1 | per stump | $75–$175 | $75–$175 |
| Safety cones, caution tape, ground protection | 1 | lot | $15–$35 | $15–$35 |
Small Tree Removal in Loomis — FAQ
How much does it cost to remove a small tree in Sacramento?
Small tree removal (under 25 ft) typically costs $200-$600 including debris haul-off. Add $75-$175 for stump grinding. Trees near structures or power lines may cost more due to careful sectional removal.
Do I need a permit to remove a tree in Sacramento?
Sacramento County's tree preservation ordinance protects certain heritage and native trees. Non-protected trees on private property generally don't require a permit. Check with Sacramento County Planning for trees over 12" diameter.
What happens to the wood and debris?
Branches are chipped into mulch (which you can keep if desired). Trunk wood is hauled to a green waste facility. Some companies offer to leave firewood-length rounds if requested.
Top 5 Small Tree Removal Contractors in Loomis
View all tree-service contractors in Loomis →Want Your Exact Price in Loomis?
Get a precise, no-obligation quote from licensed contractors in Loomis.
Small Tree Removal Cost in Nearby Cities
Related Cost Estimates
Stump Grinding
Removal
Grind tree stumps below grade to reclaim yard space and prevent regrowth.
Large Tree Removal
Removal
Remove large trees (25-80+ ft) using crane-assisted or sectional rigging techniques.
Tree Pruning & Trimming
Maintenance
Professionally prune and shape trees for health, safety, and aesthetics.
Lot Clearing
Land Clearing
Clear trees, brush, and debris from vacant lots or buildable parcels.