How Much Does Sliding Glass Door Installation Cost in Bakersfield, CA? (2026)

Average Cost

$1,400–$3,322

Materials

$677–$1,975

Labor (Kern County)

$400–$580

Sliding glass door installation replaces an existing patio door or creates a new opening to your backyard or patio. The project includes removing the old door and frame, preparing the rough opening, installing the new sliding door assembly with proper flashing and threshold, and finishing with interior and exterior trim. Modern sliding doors feature tempered dual-pane Low-E glass, multi-point locks, and smooth-rolling tandem wheels. Title 24 energy requirements apply to all patio doors in NorCal.

West-facing sliding doors in Sacramento receive intense afternoon sun. Low SHGC glass (0.22 or below) and exterior shading are recommended to minimize cooling loads.

Bakersfield is located in Kern County (Kern County). Southern Central Valley's largest city with sprawling suburbs and affordable newer construction. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Doors

Materials Included

Vinyl Sliding Glass Door (6 ft, Low-E, tempered)1 unit

$600–$1,800

Threshold Sill Pan & Flashing1 set

$25–$55

Spray Foam & Backer Rod Insulation1 kit

$12–$25

Interior & Exterior Trim Package1 set

$40–$95

Security Bar / Charlie Bar1 each

$15–$35

Labor

Window/Door Installer4h @ $70–$100/hr

$280–$400

Helper / Trim Carpenter3h @ $40–$60/hr

$120–$180

Contractor Markup30%

0%Avg 30%100%

Materials

$677–$1,975

Labor

$400–$580

Markup

$323–$767

Estimated Total Cost

$1,400 – $3,322

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

California Title 24 requires sliding glass doors to meet U-factor 0.30 and SHGC 0.23 maximums in the Sacramento climate zone. All glass in doors must be tempered safety glass per California Building Code. New openings require a structural header and building permit.

Project Timeline

Old Door Removal

30-45 min

Remove interior trim, unscrew the frame, lift out the sliding and fixed panels, and detach the old frame from the rough opening. Inspect the subfloor and framing for moisture damage.

Opening Preparation

30-60 min

Verify the rough opening is plumb, level, and square. Install sill pan flashing on the threshold, apply flashing tape to the sides and header per manufacturer waterproofing sequence.

New Door Installation

1.5-2 hrs

Set the frame into the opening, shim for plumb and level, secure with structural screws, install the fixed and sliding panels, and test the rollers and lock mechanism.

Insulation, Trim & Testing

1-1.5 hrs

Apply low-expansion foam around the frame, install interior and exterior trim, caulk all exterior joints, and perform final operation and lock tests.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Vinyl Sliding Glass Door (6 ft, Low-E, tempered)	1	unit	$600–$1800	$600–$1,800
Threshold Sill Pan & Flashing	1	set	$25–$55	$25–$55
Spray Foam & Backer Rod Insulation	1	kit	$12–$25	$12–$25
Interior & Exterior Trim Package	1	set	$40–$95	$40–$95
Security Bar / Charlie Bar	1	each	$15–$35	$15–$35

Sliding Glass Door Installation in Bakersfield — FAQ

How much does a sliding glass door cost installed?+

A standard 6-foot vinyl sliding glass door installation in NorCal runs $1,200-$3,000. Premium fiberglass or aluminum-clad wood doors range from $2,500-$5,500 installed.

Can I replace a sliding door with a French door?+

Yes, if the rough opening is the same width. French doors require more swing clearance and may need a new threshold detail. The cost is typically $500-$1,000 more than a slider.

How do I keep a sliding door energy efficient?+

Choose Low-E glass with a low SHGC rating, ensure the weatherstripping is intact, and use a track cover or draft stopper at the bottom. Title 24 compliant doors already meet NorCal's energy requirements.

How long does sliding door installation take?+

A straightforward replacement takes 4-6 hours. Creating a new opening in an exterior wall takes 1-2 days and requires a structural header and building permit.