How Much Does Paver Patio Installation Cost in Mill Valley, CA? (2026)

Average Cost

$210,136–$554,595

Materials

$167,000–$442,000

Labor (North Bay)

$1,109–$1,676

Labor rates in North Bay are +18% compared to Sacramento Metro baseline.

A paver patio installation includes excavating the area, compacting a gravel base, spreading a leveling layer of sand, laying interlocking concrete or natural stone pavers in your chosen pattern, cutting edge pavers, installing edge restraints, and sweeping polymeric sand into joints. A well-built paver patio adds outdoor living space and increases home value. This estimate uses Sacramento-area pricing for 2025-2026.

Mill Valley is located in Marin County (North Bay). Affluent wooded community at the base of Mount Tamalpais with redwood-surrounded homes. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Square feet of patio

Materials Included

Interlocking concrete pavers40000 sq ft

$100,000–$320,000

Class II base rock (compactable)800 cu yd

$28,000–$44,000

Bedding sand (coarse, washed)300 cu yd

$9,000–$15,000

Polymeric joint sand600 bag (50 lb)

$12,000–$21,000

Paver edge restraint (aluminum / plastic)12000 linear ft

$18,000–$42,000

Labor(North Bay +18%)

Hardscape installer12h @ $65–$100/hr

$779–$1,204

Laborer / excavation8h @ $41–$59/hr

$330–$472

Contractor Markup25%

0%Avg 30%100%

Materials

$167,000–$442,000

Labor

$1,109–$1,676

Markup

$42,027–$110,919

Estimated Total Cost

$210,136 – $554,595

$1,051–$2,773 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

Project Timeline

Design & layout

1-2 hours

Mark the patio shape with stakes and string, establish drainage slope (1/4" per foot away from the house), and calculate material quantities.

Excavation & base preparation

3-6 hours

Excavate 6-8 inches deep, compact the subgrade, spread base rock in 2-inch lifts, and compact each lift to 95% density.

Sand leveling & paver laying

4-8 hours

Screed a 1-inch bedding sand layer, lay pavers in the chosen pattern starting from a straight edge, cut border pavers with a wet saw.

Edge restraint & joint sand

1-3 hours

Install edge restraints with 10-inch spikes, sweep polymeric sand into joints, mist to activate, and compact the finished surface with a plate compactor.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Interlocking concrete pavers	40000	sq ft	$2.5–$8	$100,000–$320,000
Class II base rock (compactable)	800	cu yd	$35–$55	$28,000–$44,000
Bedding sand (coarse, washed)	300	cu yd	$30–$50	$9,000–$15,000
Polymeric joint sand	600	bag (50 lb)	$20–$35	$12,000–$21,000
Paver edge restraint (aluminum / plastic)	12000	linear ft	$1.5–$3.5	$18,000–$42,000

Paver Patio Installation in Mill Valley — FAQ

How much does a paver patio cost per square foot in Sacramento?+

Including materials and labor, expect $12-$25 per sq ft for standard concrete pavers and $20-$40+ per sq ft for natural stone or premium porcelain pavers. Our calculator gives you a detailed breakdown.

How long does a paver patio installation take?+

A 200 sq ft patio typically takes 2-3 days. Larger patios (400+ sq ft) or complex patterns may take 4-5 days. Weather delays are rare in Sacramento's dry climate.

Do pavers require maintenance?+

Minimal. Reapply polymeric sand every 3-5 years, pressure-wash annually if desired, and reset any shifted pavers. Pavers are easy to repair individually if one cracks.

Are pavers better than a concrete slab?+

Pavers offer superior flexibility (they move without cracking), easier repair (replace individual pavers), better drainage, and more design options. Concrete slabs are typically cheaper for large, simple areas.