How Much Does Outdoor Lighting Installation Cost in Danville, CA? (2026)

Average Cost

$2,074–$6,022

Materials

$1,043–$3,792

Labor (East Bay)

$552–$840

Labor rates in East Bay are +20% compared to Sacramento Metro baseline.

Outdoor lighting installation enhances security, safety, and curb appeal. We install wall-mounted sconces, LED flood lights, motion-sensor lights, post lights, and step/deck lighting. Each installation includes running weatherproof wiring (UF-B cable or THWN in conduit), mounting the fixture on a weatherproof electrical box, connecting to a switch or photocell/timer, and ensuring all connections are protected from moisture. GFCI protection is required on all outdoor circuits. Motion-sensor and dusk-to-dawn photocells reduce energy consumption by activating lights only when needed.

NorCal's long summer evenings and mild year-round climate make outdoor living spaces popular. Outdoor lighting extends usable evening hours and improves home security during shorter winter days.

Danville is located in Contra Costa County (East Bay). Upscale unincorporated town with ranch estates and newer luxury homes against Mount Diablo. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Fixtures

Materials Included

LED Outdoor Wall Sconce or Flood Light16 each

$640–$2,880

Weatherproof Electrical Box & In-Use Cover16 each

$128–$352

UF-B Direct-Burial Cable (14/2, per 50 ft)4 roll

$160–$300

Photocell or Programmable Timer Switch1 each

$15–$40

PVC Conduit, Fittings & Weatherproof Connectors4 set

$100–$220

Labor(East Bay +20%)

Licensed Electrician4h @ $102–$156/hr

$408–$624

Electrician's Apprentice3h @ $48–$72/hr

$144–$216

Contractor Markup30%

0%Avg 30%100%

Materials

$1,043–$3,792

Labor

$552–$840

Markup

$479–$1,390

Estimated Total Cost

$2,074 – $6,022

$519–$1,506 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

NEC 210.8(A) requires GFCI protection on all outdoor outlets. NEC 410.10 requires wet-location-rated fixtures and boxes where exposed to weather. Underground wiring must be UF-B cable buried at least 12 inches deep (24 inches without conduit protection).

Project Timeline

Layout & Circuit Planning

20-30 min

Walk the property to determine fixture locations for optimal security and aesthetic coverage. Plan the circuit route from the panel or an existing outdoor circuit. Select control method (switch, photocell, motion sensor, or timer).

Wiring & Conduit Installation

2-4 hrs

Run UF-B cable underground or THWN wire through surface-mounted PVC conduit along exterior walls. Install weatherproof boxes at each fixture location. Connect the circuit to a GFCI-protected breaker.

Fixture Mounting & Connection

1-2 hrs

Mount each fixture on its weatherproof box, make wiring connections with waterproof wire nuts, and install in-use covers. Set up photocell, timer, or motion sensor controls.

Testing & Adjustment

20-30 min

Test all fixtures, adjust motion sensor range and sensitivity, verify photocell operation, and confirm timer programming. Ensure GFCI protection trips correctly.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
LED Outdoor Wall Sconce or Flood Light	16	each	$40–$180	$640–$2,880
Weatherproof Electrical Box & In-Use Cover	16	each	$8–$22	$128–$352
UF-B Direct-Burial Cable (14/2, per 50 ft)	4	roll	$40–$75	$160–$300
Photocell or Programmable Timer Switch	1	each	$15–$40	$15–$40
PVC Conduit, Fittings & Weatherproof Connectors	4	set	$25–$55	$100–$220

Outdoor Lighting Installation in Danville — FAQ

How much does outdoor lighting installation cost?+

Professional outdoor lighting installation in NorCal costs $150-$350 per fixture for hardwired LED lights, including wiring and a weatherproof box. A typical 4-fixture installation runs $700-$1,400.

Do outdoor lights need GFCI protection?+

Yes. NEC 210.8 requires GFCI protection on all outdoor receptacles and lighting outlets. We install GFCI breakers in the panel or use GFCI-protected circuits for all outdoor lighting.

What's the best outdoor lighting for security?+

LED flood lights with motion sensors provide the best security lighting. Place them at entry points, garage areas, and dark corners. Pair with dusk-to-dawn sconces at front and back doors for constant low-level illumination.

Can I put outdoor lights on a timer?+

Yes. We install programmable timers, photocells (dusk-to-dawn), or smart switches that you control from your phone. Photocells are the most popular option in NorCal because they automatically adjust to seasonal daylight changes.