How Much Does Mold Remediation Cost in Shasta Lake, CA? (2026)

Average Cost

$3,020–$6,063

Materials

$1,320–$3,080

Labor (Far North)

$1,003–$1,584

Labor rates in Far North are -12% compared to Sacramento Metro baseline.

Professional mold remediation includes setting up containment barriers with negative air pressure, HEPA-filtering airborne spores, removing mold-contaminated drywall, insulation, and other porous materials, treating remaining surfaces with antimicrobial solutions, and verifying clearance with post-remediation air sampling. Mold remediation follows IICRC S520 standards. This estimate uses Sacramento-area pricing for 2025-2026.

Shasta Lake is located in Shasta County (Far North). Gateway to Shasta Lake with affordable housing. The local utility provider is REU.

Cost Calculator

Adjust details to get your estimate

City

Affected areas (rooms / sections)

Materials Included

Poly sheeting, tape, ZipWall poles2 lot

$80–$200

HEPA air scrubber rental (per day)12 unit-day

$720–$1,440

Antimicrobial / fungicide treatment6 gallon

$150–$360

PPE (Tyvek suits, N95/P100 respirators, gloves)8 set

$120–$280

Contaminated material disposal (bags, dump fees)2 lot

$100–$400

Post-remediation air quality test (3rd party)1 test

$150–$400

Labor(Far North -12%)

Mold remediation technician (IICRC certified)12h @ $53–$84/hr

$634–$1,003

Remediation laborer12h @ $31–$48/hr

$370–$581

Contractor Markup30%

0%Avg 30%100%

Materials

$1,320–$3,080

Labor

$1,003–$1,584

Markup

$697–$1,399

Estimated Total Cost

$3,020 – $6,063

$1,510–$3,032 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

Project Timeline

Inspection & containment

2-4 hours

Inspect affected areas, determine the extent of mold growth, and set up containment barriers with negative air pressure to prevent spore migration.

Material removal

4-8 hours

Remove mold-contaminated drywall, insulation, carpet, and other porous materials. Double-bag contaminated debris for disposal. HEPA-vacuum all surfaces.

Treatment & cleaning

2-4 hours

Apply antimicrobial solution to all remaining surfaces (framing, subfloor, concrete). Wire-brush or soda-blast stubborn mold on wood framing if needed.

Clearance testing & demobilization

1-2 days

Run HEPA air scrubbers for 24-48 hours, then have a third-party inspector perform post-remediation air sampling. Remove containment and equipment once clearance is achieved.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Poly sheeting, tape, ZipWall poles	2	lot	$40–$100	$80–$200
HEPA air scrubber rental (per day)	12	unit-day	$60–$120	$720–$1,440
Antimicrobial / fungicide treatment	6	gallon	$25–$60	$150–$360
PPE (Tyvek suits, N95/P100 respirators, gloves)	8	set	$15–$35	$120–$280
Contaminated material disposal (bags, dump fees)	2	lot	$50–$200	$100–$400
Post-remediation air quality test (3rd party)	1	test	$150–$400	$150–$400

Mold Remediation in Shasta Lake — FAQ

How much does mold remediation cost?+

Small areas (under 30 sq ft) cost $500-$2,000. Moderate remediation (1-2 rooms) runs $2,000-$6,000. Large-scale remediation (multiple rooms, HVAC contamination) can cost $5,000-$15,000+.

Is mold remediation covered by insurance?+

Most policies cover mold remediation if the mold resulted from a covered water damage event (e.g., burst pipe). Pre-existing or long-term mold from deferred maintenance is typically excluded. Check your policy's mold coverage limits.

How do I know if I have a mold problem?+

Signs include visible mold growth, musty odors, chronic allergy symptoms, and recent water damage. A professional mold inspection with air sampling provides definitive answers and identifies hidden mold behind walls.

Can I clean mold myself?+

Small areas (under 10 sq ft on non-porous surfaces) can be cleaned with detergent and water. Larger areas, mold on drywall/insulation, or HVAC contamination require professional remediation with containment to prevent spore spread.