How Much Does Hardwood Floor Refinishing Cost in Anderson, CA? (2026)

Average Cost

$169,329–$358,795

Materials

$137,500–$292,000

Labor (Far North)

$1,294–$2,094

Labor rates in Far North are -12% compared to Sacramento Metro baseline.

Hardwood refinishing breathes new life into worn, scratched, or faded hardwood floors. This estimate covers sanding the floor through three grits (coarse, medium, fine), applying wood stain if desired, and coating with 2–3 coats of oil-based or water-based polyurethane. Dustless sanding systems minimize mess. NorCal homes built in the 1940s–1970s often have beautiful original hardwood hiding under carpet. Pricing per square foot.

Anderson is located in Shasta County (Far North). Small city south of Redding with affordable family homes. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Square feet

Materials Included

Sanding discs & belts (multi-grit pack)1500 pack

$37,500–$82,500

Wood stain (gallon)1000 gallon

$30,000–$60,000

Polyurethane finish (gallon)1500 gallon

$60,000–$127,500

Wood filler & putty1000 tub

$10,000–$22,000

Labor(Far North -12%)

Floor Refinishing Specialist35h @ $37–$60/hr

$1,294–$2,094

Contractor Markup22%

0%Avg 30%100%

Materials

$137,500–$292,000

Labor

$1,294–$2,094

Markup

$30,535–$64,701

Estimated Total Cost

$169,329 – $358,795

$339–$718 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

Project Timeline

Furniture Removal & Prep

0.5 day

Move furniture, remove shoe molding, cover doorways with plastic sheeting, and inspect the floor for protruding nails or damage.

Sanding

1–2 days

Sand the floor with a drum sander (36, 60, then 100 grit), edge-sand along walls, and hand-sand corners. Vacuum between grits.

Staining

1 day

Apply wood stain with lambswool applicator, working one section at a time. Allow 8–12 hours to dry before topcoat.

Finishing Coats

2–3 days

Apply 2–3 coats of polyurethane with light sanding (220 grit) between coats. Allow 24 hours between coats and 72 hours before replacing furniture.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Sanding discs & belts (multi-grit pack)	1500	pack	$25–$55	$37,500–$82,500
Wood stain (gallon)	1000	gallon	$30–$60	$30,000–$60,000
Polyurethane finish (gallon)	1500	gallon	$40–$85	$60,000–$127,500
Wood filler & putty	1000	tub	$10–$22	$10,000–$22,000

Hardwood Floor Refinishing in Anderson — FAQ

How long does hardwood refinishing take?+

A typical 500 sq ft room takes 4–5 days including sanding, staining, and 2–3 poly coats with dry time. The room is unusable during this period.

Water-based vs. oil-based polyurethane?+

Water-based dries faster (2–3 hours between coats), has low odor, and dries clear. Oil-based adds a warm amber tone, is more durable, but takes longer to cure and has strong fumes.

Can engineered hardwood be refinished?+

It depends on the veneer thickness. Engineered floors with a 2mm+ wear layer can typically be refinished once. Thicker 4mm+ veneers can handle 2–3 refinishes.

Is dustless sanding really dustless?+

Dustless systems capture 95–99% of sanding dust, but some fine particles escape. We seal doorways and HVAC vents to minimize dust spread throughout the home.