How Much Does Hardwood Floor Installation Cost in Redding, CA? (2026)

Average Cost

$1,450,096–$3,301,999

Materials

$1,158,823–$2,639,575

Labor (Far North)

$1,254–$2,024

Labor rates in Far North are -12% compared to Sacramento Metro baseline.

Hardwood flooring adds warmth, value, and timeless beauty to any home. This estimate covers subfloor preparation, moisture barrier installation, nailing or floating engineered or solid hardwood planks, and finishing with shoe molding and transitions. In NorCal, engineered hardwood is recommended for slab-on-grade homes due to moisture concerns. Pricing scales per square foot of floor area.

NorCal's dry summers and wet winters cause wood to expand and contract. Maintain 30–50% indoor humidity and leave a 3/8-inch expansion gap around all walls.

Redding is located in Shasta County (Far North). Largest city in the far north with homes from the 1950s–2020s. The local utility provider is REU.

Cost Calculator

Adjust details to get your estimate

City

Square feet

Materials Included

Engineered hardwood planks (oak, 5 in wide)262500 sq ft

$1,050,000–$2,362,500

Moisture barrier underlayment262500 sq ft

$78,750–$196,875

Transition strips (T-molding, reducers)4 each

$48–$140

Shoe molding / quarter round (8 ft)10000 piece

$30,000–$80,000

Flooring nails or adhesive1 kit

$25–$60

Labor(Far North -12%)

Flooring Installer30h @ $35–$57/hr

$1,056–$1,716

Finish Carpenter5h @ $40–$62/hr

$198–$308

Contractor Markup25%

0%Avg 30%100%

Materials

$1,158,823–$2,639,575

Labor

$1,254–$2,024

Markup

$290,019–$660,400

Estimated Total Cost

$1,450,096 – $3,301,999

$2,900–$6,604 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

Project Timeline

Subfloor Preparation

0.5–1 day

Remove existing flooring, check subfloor for levelness (within 3/16 in per 10 ft), repair squeaks, and apply leveling compound if needed.

Acclimation

3–5 days

Stack hardwood in the installation room for 3–5 days to acclimate to the home's temperature and humidity levels.

Installation

2–4 days

Lay moisture barrier, install planks using nail-down, glue-down, or floating method, and stagger joints for structural integrity.

Trim & Finishing

1 day

Install shoe molding, transition strips at doorways, and touch up any scratches. Vacuum and damp-mop the completed floor.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Engineered hardwood planks (oak, 5 in wide)	262500	sq ft	$4–$9	$1,050,000–$2,362,500
Moisture barrier underlayment	262500	sq ft	$0.3–$0.75	$78,750–$196,875
Transition strips (T-molding, reducers)	4	each	$12–$35	$48–$140
Shoe molding / quarter round (8 ft)	10000	piece	$3–$8	$30,000–$80,000
Flooring nails or adhesive	1	kit	$25–$60	$25–$60

Hardwood Floor Installation in Redding — FAQ

Solid vs. engineered hardwood — which is better for NorCal?+

Engineered hardwood handles NorCal's seasonal humidity swings better than solid. It can also be installed over concrete slabs, which are common in the Sacramento Valley.

How long does hardwood flooring last?+

Solid hardwood lasts 75–100 years and can be refinished 6–8 times. Engineered hardwood lasts 30–50 years and can typically be refinished 1–3 times depending on veneer thickness.

Do I need to remove baseboards before installation?+

Removing baseboards provides the cleanest look. Alternatively, shoe molding can be installed over existing baseboards to cover the expansion gap.

What is the acclimation period?+

Hardwood should sit in the room for 3–5 days before installation to adjust to the home's moisture and temperature. This prevents gaps and buckling after installation.