How Much Does GFCI Outlet Installation Cost in Shingle Springs, CA? (2026)

Average Cost

$603–$1,178

Materials

$277–$620

Labor (El Dorado County)

$187–$286

Labor rates in El Dorado County are +10% compared to Sacramento Metro baseline.

GFCI (Ground Fault Circuit Interrupter) outlets protect against electrical shock by instantly cutting power when they detect current leaking to ground. California Electrical Code requires GFCI protection in all bathrooms, kitchens (within 6 feet of a sink), garages, outdoor locations, laundry areas, and crawl spaces. Older NorCal homes frequently lack GFCI outlets in required locations, which is both a safety hazard and a code violation. Our electricians replace standard outlets with GFCI receptacles or install GFCI breakers at the panel to protect entire circuits. We also install tamper-resistant GFCI outlets as required by current code.

Shingle Springs is located in El Dorado County (El Dorado County). Rural foothill area with custom homes on larger parcels. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Outlets

Materials Included

GFCI Receptacle (20A, tamper-resistant, self-test)16 each

$240–$480

Weatherproof or Standard Cover Plate16 each

$32–$128

Wire Connectors & Pigtails1 set

$5–$12

Box Extender or Spacer (for shallow boxes)8 each

$16–$40

Labor(El Dorado County +10%)

Licensed Electrician2h @ $94–$143/hr

$187–$286

Contractor Markup30%

0%Avg 30%100%

Materials

$277–$620

Labor

$187–$286

Markup

$139–$272

Estimated Total Cost

$603 – $1,178

$151–$295 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

NEC 210.8 requires GFCI protection in bathrooms, garages, outdoors, crawl spaces, unfinished basements, kitchens (within 6 feet of a sink), laundry areas, and near pools/hot tubs. The 2023 NEC expands GFCI requirements to 250V outlets up to 50A in many locations. Self-test GFCI devices are now required.

Project Timeline

Assessment & Circuit Testing

15-20 min

Identify all outlets requiring GFCI protection. Test existing wiring for proper grounding, correct polarity, and circuit load. Determine if GFCI receptacles or GFCI breakers are the better solution.

GFCI Receptacle Installation

15-30 min per outlet

Turn off the circuit breaker, remove the existing outlet, connect the GFCI receptacle (line and load terminals for downstream protection), secure in the box, and install the cover plate.

Testing & Verification

10-15 min

Test each GFCI outlet with a plug-in circuit tester to verify it trips and resets correctly. Confirm downstream outlets are protected (if using load terminals). Label the GFCI-protected circuits.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
GFCI Receptacle (20A, tamper-resistant, self-test)	16	each	$15–$30	$240–$480
Weatherproof or Standard Cover Plate	16	each	$2–$8	$32–$128
Wire Connectors & Pigtails	1	set	$5–$12	$5–$12
Box Extender or Spacer (for shallow boxes)	8	each	$2–$5	$16–$40

GFCI Outlet Installation in Shingle Springs — FAQ

How much does GFCI outlet installation cost?+

Replacing a standard outlet with a GFCI receptacle costs $75-$150 per outlet in NorCal, including the device, cover plate, and labor. Installing 4-6 GFCI outlets typically runs $300-$600.

Where are GFCI outlets required by code?+

Current California Electrical Code requires GFCI protection in bathrooms, kitchens (within 6 feet of a sink), garages, all outdoor locations, laundry rooms, crawl spaces, unfinished basements, and near pools/spas. The 2023 NEC also added GFCI requirements for 240V outlets up to 50A.

What's the difference between a GFCI outlet and GFCI breaker?+

A GFCI outlet protects that outlet and any outlets wired downstream (load side). A GFCI breaker protects the entire circuit from the panel. GFCI breakers are useful when multiple outlets on one circuit need protection, but they cost more ($35-$65 vs. $15-$30).

My GFCI outlet keeps tripping — what's wrong?+

Frequent tripping can indicate a genuine ground fault (moisture, damaged wiring), an overloaded circuit, or a worn-out GFCI device. GFCIs have a lifespan of 10-15 years. Our electrician diagnoses the cause and replaces the device if needed.