How Much Does Generator Installation Cost in Lincoln, CA? (2026)

Average Cost

$8,117–$15,132

Materials

$5,000–$9,750

Labor (Placer County)

$1,244–$1,890

Labor rates in Placer County are +5% compared to Sacramento Metro baseline.

A standby generator automatically provides backup power within seconds of a utility outage, keeping your lights, refrigerator, HVAC, and sump pump running. The installation includes pouring a concrete pad, setting the generator, running gas and electrical connections, installing an automatic transfer switch (ATS) at the main panel, and programming the weekly exercise cycle. NorCal homeowners increasingly rely on generators during PSPS (Public Safety Power Shutoff) events, which can last 24-72 hours during high fire-risk conditions. We install Generac, Kohler, and Briggs & Stratton units from 10kW to 26kW.

NorCal's wildfire risk drives frequent PSPS events in foothill communities. Extreme summer heat (100°F+) also stresses the grid, causing rolling blackouts. A standby generator ensures HVAC, refrigeration, and medical equipment continue operating during outages.

Lincoln is located in Placer County (Placer County). Rapidly expanding with large retirement and family communities. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Generators

Materials Included

Standby Generator (16-22kW, air-cooled)1 unit

$4,000–$7,500

200A Automatic Transfer Switch (ATS)1 unit

$500–$1,100

Concrete Generator Pad (pre-cast or poured)1 each

$100–$250

Gas Line Extension (3/4" CSST, 20-40 ft)1 run

$200–$450

Electrical Conduit, Wire & Fittings (panel to ATS to gen)1 set

$150–$350

Generator Start Battery1 each

$50–$100

Labor(Placer County +5%)

Licensed Electrician8h @ $100–$152/hr

$798–$1,218

Licensed Plumber (gas line)3h @ $100–$147/hr

$299–$441

Laborer (pad & placement)4h @ $37–$58/hr

$147–$231

Contractor Markup30%

0%Avg 30%100%

Materials

$5,000–$9,750

Labor

$1,244–$1,890

Markup

$1,873–$3,492

Estimated Total Cost

$8,117 – $15,132

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

NEC Article 702 governs optional standby systems. The generator must be located at least 5 feet from operable windows, doors, and air intakes. An automatic transfer switch must prevent backfeed to the utility grid. Gas line work requires a separate plumbing permit.

Project Timeline

Load Sizing & Site Selection

1-2 hrs

Calculate your home's essential load (or full load for whole-house coverage) to size the generator correctly. Select the outdoor location following minimum clearance requirements from windows, doors, and property lines.

Pad & Gas Line Installation

0.5-1 day

Pour or set the concrete pad, level it, and allow it to cure. Run the gas line from the meter to the generator location, install a shutoff valve and sediment trap, and pressure test the gas line.

Generator & Transfer Switch Installation

4-6 hrs

Set the generator on the pad, connect the gas supply, install the automatic transfer switch adjacent to the main panel, and run the power cable from the generator to the transfer switch.

Commissioning & Inspection

1-2 hrs

Start the generator, simulate a power outage to verify automatic transfer, test all circuits under load, program the weekly exercise schedule, and register the warranty. Schedule electrical and gas inspections.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Standby Generator (16-22kW, air-cooled)	1	unit	$4000–$7500	$4,000–$7,500
200A Automatic Transfer Switch (ATS)	1	unit	$500–$1100	$500–$1,100
Concrete Generator Pad (pre-cast or poured)	1	each	$100–$250	$100–$250
Gas Line Extension (3/4" CSST, 20-40 ft)	1	run	$200–$450	$200–$450
Electrical Conduit, Wire & Fittings (panel to ATS to gen)	1	set	$150–$350	$150–$350
Generator Start Battery	1	each	$50–$100	$50–$100

Generator Installation in Lincoln — FAQ

How much does a standby generator cost in Sacramento?+

A 16-22kW standby generator fully installed in NorCal costs $8,000-$15,000 including the generator, transfer switch, gas line, concrete pad, and all labor. Larger liquid-cooled units (26kW+) for bigger homes can run $15,000-$22,000.

What size generator do I need?+

A 16kW generator powers most essential circuits (lights, fridge, HVAC, kitchen). A 22kW unit covers a typical 2,000-3,000 sq ft NorCal home entirely. We perform a load calculation to recommend the right size for your home.

Why do NorCal homeowners need generators?+

PG&E's PSPS events can shut off power for 1-3 days during high fire-risk periods, primarily affecting foothill and rural NorCal areas. Generators also protect against general outages during winter storms and summer heat waves that strain the grid.

How loud is a standby generator?+

Modern air-cooled generators run at 65-70 dB at 23 feet — about as loud as a normal conversation. Liquid-cooled models are even quieter. Most NorCal jurisdictions allow generators that meet the manufacturer's specified noise levels.