How Much Does Fascia & Soffit Repair Cost in Escalon, CA? (2026)

Average Cost

$3,263–$7,012

Materials

$2,124–$4,787

Labor (San Joaquin Valley)

$386–$607

Labor rates in San Joaquin Valley are -8% compared to Sacramento Metro baseline.

Fascia boards (the vertical trim at the roof edge) and soffits (the horizontal panels under the eave overhang) protect your roof structure from moisture, pests, and weather. Over time, NorCal's wet winters cause fascia to rot, especially behind clogged gutters. Soffit panels can deteriorate or be damaged by animals seeking attic access. Our repair service includes removing damaged sections, treating exposed framing for moisture, installing new primed or PVC fascia and vented soffit panels, and reattaching gutters. PVC and composite materials offer maintenance-free alternatives to wood.

NorCal's wet winters and hot summers create a cycle of moisture absorption and drying that accelerates wood fascia rot. PVC fascia is increasingly popular in the Sacramento area for its zero-maintenance performance.

Escalon is located in San Joaquin County (San Joaquin Valley). Small agricultural community with tight-knit neighborhoods. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Linear Feet

Materials Included

Primed Fascia Board (1x6 or 1x8, per 16 ft)60 board

$720–$1,680

Vented Vinyl Soffit Panel (12" wide, per 12 ft)90 panel

$900–$1,980

J-Channel & F-Channel Trim120 piece

$480–$1,080

Exterior Paint & Primer (quart)1 quart

$12–$25

Stainless Steel Ring-Shank Nails & Screws1 box

$12–$22

Labor(San Joaquin Valley -8%)

Carpenter6h @ $46–$74/hr

$276–$442

Painter (touch-up)3h @ $37–$55/hr

$110–$166

Contractor Markup30%

0%Avg 30%100%

Materials

$2,124–$4,787

Labor

$386–$607

Markup

$753–$1,618

Estimated Total Cost

$3,263 – $7,012

$109–$234 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

Project Timeline

Inspection & Gutter Removal

30-60 min

Inspect the full eave line to determine the extent of damage. Temporarily remove gutters from the affected sections. Probe fascia and sub-fascia for rot.

Damaged Material Removal

1-2 hrs

Remove rotted fascia boards and deteriorated soffit panels. Inspect exposed rafter tails and sheathing for damage. Treat wood framing with a borate-based preservative.

New Fascia & Soffit Installation

2-4 hrs

Install new primed fascia boards (or PVC fascia for maintenance-free performance), fit vented soffit panels with J-channel and F-channel trim, and secure with stainless fasteners.

Gutter Reinstallation & Paint

1-2 hrs

Reinstall gutters with new hangers on the fresh fascia. Apply two coats of exterior paint to wood fascia. Clean up all debris.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Primed Fascia Board (1x6 or 1x8, per 16 ft)	60	board	$12–$28	$720–$1,680
Vented Vinyl Soffit Panel (12" wide, per 12 ft)	90	panel	$10–$22	$900–$1,980
J-Channel & F-Channel Trim	120	piece	$4–$9	$480–$1,080
Exterior Paint & Primer (quart)	1	quart	$12–$25	$12–$25
Stainless Steel Ring-Shank Nails & Screws	1	box	$12–$22	$12–$22

Fascia & Soffit Repair in Escalon — FAQ

How can I tell if my fascia is rotted?+

Look for peeling paint, soft or spongy spots when probed, visible black or brown discoloration, or sections that crumble when touched. Also check for water stains on the soffit below the gutter line.

Should I use wood or PVC fascia?+

PVC (cellular PVC) fascia never rots, doesn't need painting, and resists insects. It costs about 50% more than wood but lasts indefinitely in NorCal's climate. Wood fascia is more affordable and traditional-looking but requires regular painting.

Why is my fascia rotting behind the gutters?+

Clogged gutters overflow backward, soaking the fascia board. Ice dams (rare in NorCal) and worn drip edge also allow water behind the gutter. Proper gutter maintenance and drip edge installation prevent recurring rot.

Do vented soffits improve attic ventilation?+

Yes. Vented soffits provide the intake air that ridge vents or roof vents exhaust. Without soffit ventilation, attic temperatures can exceed 150°F in NorCal summers, damaging shingles from below and increasing cooling costs.