How Much Does Egress Window Installation Cost in Folsom, CA? (2026)

Average Cost

$2,171–$3,946

Materials

$655–$1,560

Labor (Sacramento Metro)

$1,015–$1,475

Egress window installation provides a safe emergency exit from basement bedrooms and below-grade living spaces. The project includes cutting a new opening in the foundation wall or enlarging an existing window opening, installing a window well (for below-grade installations), waterproofing, and fitting a code-compliant window that meets IRC minimum size requirements: 5.7 sq ft of clear opening, minimum 20-inch width, and maximum 44-inch sill height. This is one of the most important safety upgrades for NorCal homes with finished basements.

NorCal basement egress windows should include a window well cover to prevent rain accumulation during winter storms. Proper drainage below the window well is critical given the Sacramento region's clay-heavy soils.

Folsom is located in Sacramento County (Sacramento Metro). Upscale suburb with newer construction and planned communities. The local utility provider is SMUD.

Cost Calculator

Adjust details to get your estimate

City

Windows

Materials Included

Egress-Compliant Casement or Slider Window1 unit

$350–$800

Window Well (galvanized steel or polycarbonate)1 unit

$150–$400

Window Well Drain Kit (gravel + pipe)1 kit

$40–$85

Waterproofing Membrane & Sealant1 kit

$35–$75

Window Well Cover (clear polycarbonate)1 each

$45–$120

Concrete Cutting & Patching Materials1 set

$80–$200

Labor

General Contractor / Window Installer8h @ $75–$110/hr

$600–$880

Concrete Cutter3h @ $85–$125/hr

$255–$375

Laborer4h @ $40–$55/hr

$160–$220

Contractor Markup30%

0%Avg 30%100%

Materials

$655–$1,560

Labor

$1,015–$1,475

Markup

$501–$911

Estimated Total Cost

$2,171 – $3,946

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

California Building Code Section R310 requires egress windows in all sleeping rooms and basements with habitable space. Minimum net clear opening: 5.7 sq ft (5.0 sq ft at grade), minimum width 20 in, minimum height 24 in, maximum sill height 44 in. Window wells must be at least 36 inches wide and provide 9 sq ft of floor area. A permit and inspection are required.

Project Timeline

Permit & Layout

1-2 weeks

Pull a building permit, verify the opening location avoids utility lines and structural elements, and mark the cut lines on the foundation wall. Call 811 for underground utility marking.

Foundation Cutting & Excavation

4-6 hrs

Cut the concrete or block foundation wall to the required opening size using a concrete saw. Excavate the exterior soil to create the window well pit, ensuring proper drainage slope.

Window Well & Drainage

2-3 hrs

Install the window well, backfill with gravel for drainage, connect the well drain to the footing drain or install a gravel sump, and apply waterproofing to the foundation cut edges.

Window Installation & Finishing

2-3 hrs

Install the egress window with proper flashing and sealant, insulate around the frame, finish interior drywall returns, and install the window well cover if selected.

Inspection & Cleanup

1-2 hrs

Schedule the building inspection to verify egress compliance (opening size, sill height, clear area). Clean up excavated soil, restore landscaping, and demonstrate window operation.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Egress-Compliant Casement or Slider Window	1	unit	$350–$800	$350–$800
Window Well (galvanized steel or polycarbonate)	1	unit	$150–$400	$150–$400
Window Well Drain Kit (gravel + pipe)	1	kit	$40–$85	$40–$85
Waterproofing Membrane & Sealant	1	kit	$35–$75	$35–$75
Window Well Cover (clear polycarbonate)	1	each	$45–$120	$45–$120
Concrete Cutting & Patching Materials	1	set	$80–$200	$80–$200

Egress Window Installation in Folsom — FAQ

What size window qualifies as egress?+

Per IRC and California Building Code, an egress window must have a minimum net clear opening of 5.7 sq ft (5.0 sq ft at grade), minimum 20-inch width, minimum 24-inch height, and maximum 44-inch sill height from the floor.

Do I need an egress window in my basement bedroom?+

Yes. California Building Code requires every sleeping room to have at least one egress window or door for emergency escape. Finishing a basement bedroom without an egress window is a code violation and a serious safety risk.

How much does egress window installation cost?+

A complete egress window installation including foundation cutting, window well, and the window itself runs $2,500-$5,500 in the Sacramento area. The cost depends on foundation type, soil conditions, and window well size.

Can I install an egress window myself?+

Egress window installation involves cutting the foundation, which requires specialized tools and structural knowledge. A permit and inspection are mandatory. We strongly recommend professional installation for safety and code compliance.