How Much Does Deck Staining & Sealing Cost in Shasta Lake, CA? (2026)

Average Cost

$104,841–$212,201

Materials

$85,222–$172,853

Labor (Far North)

$713–$1,082

Labor rates in Far North are -12% compared to Sacramento Metro baseline.

Deck staining extends the life of your outdoor living space by protecting wood from NorCal's intense UV exposure and winter rain. This estimate covers pressure washing, brightening, sanding rough areas, and applying one to two coats of semi-transparent or solid deck stain. Oil-based stains penetrate deeper and last longer on horizontal surfaces. Pricing per square foot of deck surface.

NorCal's dry summers (May–October) provide ideal conditions for deck staining. Avoid staining when surface temperatures exceed 90 degrees F or when overnight dew is expected.

Shasta Lake is located in Shasta County (Far North). Gateway to Shasta Lake with affordable housing. The local utility provider is REU.

Cost Calculator

Adjust details to get your estimate

City

Square feet of deck

Materials Included

Exterior deck stain (5-gallon bucket)600 bucket

$78,000–$156,000

Deck cleaner & brightener (gallon)600 gallon

$7,200–$16,800

Sanding pads & discs1 kit

$12–$28

Masking tape & plastic sheeting1 kit

$10–$25

Labor(Far North -12%)

Deck Staining Specialist15h @ $33–$51/hr

$502–$766

Pressure Wash Operator6h @ $35–$53/hr

$211–$317

Contractor Markup22%

0%Avg 30%100%

Materials

$85,222–$172,853

Labor

$713–$1,082

Markup

$18,906–$38,266

Estimated Total Cost

$104,841 – $212,201

$349–$707 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

Project Timeline

Pressure Washing & Cleaning

1 day

Pressure wash the deck at appropriate PSI (1,200–1,500 for softwood), apply deck cleaner and brightener, and rinse thoroughly.

Drying & Sanding

1–2 days

Allow the deck to dry completely (24–48 hours). Sand raised grain, splinters, and rough spots with 80-grit paper.

Stain Application

1–2 days

Apply stain with pad applicator, brush, or sprayer-and-backbrush method. Work with the grain, maintaining a wet edge to prevent lap marks.

Second Coat & Cleanup

0.5–1 day

Apply a second coat on high-traffic areas and railings if needed. Allow 24–48 hours before foot traffic. Clean up and remove masking.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Exterior deck stain (5-gallon bucket)	600	bucket	$130–$260	$78,000–$156,000
Deck cleaner & brightener (gallon)	600	gallon	$12–$28	$7,200–$16,800
Sanding pads & discs	1	kit	$12–$28	$12–$28
Masking tape & plastic sheeting	1	kit	$10–$25	$10–$25

Deck Staining & Sealing in Shasta Lake — FAQ

How often should I stain my deck in NorCal?+

Semi-transparent stain lasts 2–3 years on horizontal surfaces. Solid stain lasts 3–5 years. Decks in full sun (common in the Sacramento Valley) need more frequent maintenance.

Oil-based vs. water-based deck stain?+

Oil-based stains penetrate deeper and last longer on decks. Water-based stains are easier to clean up and lower VOC. For NorCal's hot, sunny climate, oil-based is generally the better performer on decks.

Can I stain a new deck right away?+

Pressure-treated lumber should weather for 3–6 months before staining. Cedar and redwood can be stained after 30 days of dry weather. A water bead test helps determine readiness.