How Much Does Concrete Steps Repair Cost in Loomis, CA? (2026)

Average Cost

$1,799–$2,729

Materials

$843–$1,348

Labor (Placer County)

$541–$751

Labor rates in Placer County are +5% compared to Sacramento Metro baseline.

Concrete step repair addresses crumbling edges, spalling surfaces, cracks, and uneven settling. Depending on the damage severity, repairs may involve patching with polymer-modified repair mortar, resurfacing with a concrete overlay, or partial demolition and re-pouring of individual steps. Safety is the primary concern — uneven or crumbling steps are a trip hazard and potential code violation. NorCal's freeze-thaw cycles at higher elevations and clay soil movement in the valley both contribute to step deterioration.

Loomis is located in Placer County (Placer County). Small-town feel with larger rural lots and equestrian properties. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Number of steps

Materials Included

Polymer-modified repair mortar15 50 lb bag

$375–$600

Concrete bonding adhesive1 gallon

$15–$28

Bagged concrete mix (5000 PSI)50 80 lb bag

$300–$450

Form lumber and bracing150 linear foot

$127.5–$225

Concrete sealer1 gallon

$25–$45

Labor(Placer County +5%)

Concrete mason7.5h @ $53–$74/hr

$394–$551

General laborer5h @ $29–$40/hr

$147–$200

Contractor Markup30%

0%Avg 30%100%

Materials

$843–$1,348

Labor

$541–$751

Markup

$415–$630

Estimated Total Cost

$1,799 – $2,729

$360–$546 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

Steps must meet IRC requirements: max 7-3/4 inch rise, min 10-inch tread depth, with variation no greater than 3/8 inch between steps.

Project Timeline

Assessment & preparation

0.5 day

Inspect damage, remove loose concrete, clean surfaces, and apply bonding agent.

Forming & repair

0.5–1 day

Set forms for damaged areas, apply repair mortar or pour new concrete as needed.

Finishing & curing

1–3 days

Smooth and texture repaired surfaces to match existing steps, apply sealer after curing.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Polymer-modified repair mortar	15	50 lb bag	$25–$40	$375–$600
Concrete bonding adhesive	1	gallon	$15–$28	$15–$28
Bagged concrete mix (5000 PSI)	50	80 lb bag	$6–$9	$300–$450
Form lumber and bracing	150	linear foot	$0.85–$1.5	$127.5–$225
Concrete sealer	1	gallon	$25–$45	$25–$45

Concrete Steps Repair in Loomis — FAQ

Should I repair or replace my concrete steps?+

If damage is limited to surface spalling or minor cracks, repair is cost-effective. If steps are severely settled, tilted, or structurally compromised, full replacement is the better long-term investment.

How long do concrete step repairs last?+

Quality repairs using polymer-modified mortar and proper bonding agents typically last 10–15 years. Sealing the repaired surface every 2–3 years extends longevity.

Are crumbling steps a code violation?+

Yes, in most NorCal jurisdictions, damaged steps that create a trip hazard can violate building and safety codes, especially for rental properties.