How Much Does Concrete Slab Foundation Cost in Winters, CA? (2026)

Average Cost

$1,452,069–$2,109,231

Materials

$1,160,000–$1,685,000

Labor (Yolo County)

$1,655–$2,385

A concrete slab foundation is the base for garages, ADUs, room additions, shops, and other structures. Work includes site grading, compaction, vapor barrier installation, rebar and anchor bolt placement, plumbing rough-in (if needed), and pouring a 4–6 inch reinforced slab with thickened edges. In Sacramento's expansive soil conditions, proper engineering and soil preparation are critical to avoid cracking and differential settlement.

Sacramento's expansive clay soils expand and contract with moisture changes — proper moisture conditioning before the pour reduces cracking risk.

Winters is located in Yolo County (Yolo County). Small agricultural town with charming downtown and older homes. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

Materials Included

Labor

Concrete finisher20h @ $48–$68/hr
$960–$1,360
General laborer15h @ $28–$40/hr
$420–$600
Grading / excavation operator5h @ $55–$85/hr
$275–$425
25%
0%Avg 30%100%

Materials

$1,160,000–$1,685,000

Labor

$1,655–$2,385

Markup

$290,414–$421,846

Estimated Total Cost

$1,452,069 – $2,109,231

$2,904–$4,218 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

California Building Code

Foundation design must comply with CBC Chapter 18. Expansive soil areas may require post-tensioned slabs or deeper footings per the geotechnical report.

Project Timeline

1

Site preparation & grading

1–2 days

Clear site, excavate to depth, grade for drainage, and compact native soil.

2

Gravel base & vapor barrier

0.5–1 day

Spread and compact gravel base, lay vapor barrier with overlapping seams.

3

Forming & reinforcement

1 day

Set perimeter forms, install rebar grid, place anchor bolts, and coordinate plumbing rough-in.

4

Concrete pour

1 day

Pour, screed, float, and finish the slab. Trowel edges and embed anchor bolts.

5

Curing

7–28 days

Apply curing compound or wet-cure. No construction loads for 7 days minimum, full strength at 28 days.

Materials Breakdown

MaterialQtyUnitUnit CostTotal
Ready-mix concrete (4000 PSI)5000cubic yard$140–$185$700,000–$925,000
Rebar (#4, 1/2-inch) and chairs250000linear foot$0.8–$1.3$200,000–$325,000
10-mil vapor barrier500roll (1000 sq ft)$65–$110$32,500–$55,000
Crushed gravel base4000cubic yard$40–$65$160,000–$260,000
Anchor bolts (1/2-inch x 10-inch)10000each$2.5–$4.5$25,000–$45,000
Form lumber and stakes50000linear foot$0.85–$1.5$42,500–$75,000

Concrete Slab Foundation in Winters — FAQ

How thick should a slab foundation be?+

Standard residential slabs are 4 inches thick with thickened edges (12–18 inches) around the perimeter. Garages and shops often use 5–6 inch slabs for heavier loads.

Do I need a soil test before pouring a foundation?+

In NorCal, a geotechnical soil report is often required for new construction. Sacramento's expansive clay soils may require special preparation or deeper footings.

Can I pour a slab foundation in winter?+

Yes, but precautions are needed. Concrete must be protected from freezing for the first 48 hours. Heated blankets or enclosures may be required in foothill areas.

Do I need a permit for a slab foundation?+

Yes. All new foundations require a building permit and inspection in NorCal jurisdictions. An engineered plan is typically required.

Top 5 Concrete Slab Foundation Contractors in Winters

View all concrete contractors in Winters

Want Your Exact Price in Winters?

Get a precise, no-obligation quote from licensed contractors in Winters.

1
2

Obtenga Su Cotizacion Gratis

Concrete Slab Foundation Cost in Nearby Cities

Related Cost Estimates