How Much Does Chain Link Fence Installation Cost in Shasta Lake, CA? (2026)

Average Cost

$108,709–$189,895

Materials

$86,075–$150,535

Labor (Far North)

$892–$1,381

Labor rates in Far North are -12% compared to Sacramento Metro baseline.

Chain link fencing is the most cost-effective way to enclose a yard, dog run, or commercial lot. This estimate covers setting galvanized steel terminal and line posts in concrete, stretching diamond-weave fabric, and installing tension bars, bands, and a walk gate. Vinyl-coated options in black or green blend better with landscaping. Pricing reflects NorCal supplier rates for 2025-2026.

Shasta Lake is located in Shasta County (Far North). Gateway to Shasta Lake with affordable housing. The local utility provider is REU.

Cost Calculator

Adjust details to get your estimate

City

Linear feet of fence

Materials Included

Terminal posts (2-3/8 in, galvanized)900 each

$16,200–$28,800

Line posts (1-5/8 in, galvanized)2250 each

$22,500–$40,500

Chain link fabric (4 ft × 50 ft roll)450 roll

$29,250–$49,500

Tension bars, bands & ties kit1 kit

$40–$75

Top rail (1-3/8 in × 10.5 ft)2250 each

$18,000–$31,500

Walk gate (4 ft, galvanized)1 each

$85–$160

Labor(Far North -12%)

Fence Installer18h @ $33–$51/hr

$602–$919

General Laborer15h @ $19–$31/hr

$290–$462

Contractor Markup25%

0%Avg 30%100%

Materials

$86,075–$150,535

Labor

$892–$1,381

Markup

$21,742–$37,979

Estimated Total Cost

$108,709 – $189,895

$725–$1,266 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

California Building Code

Chain link fences over 6 feet may require a permit. Barbed wire tops are typically prohibited in residential zones.

Project Timeline

Layout & Utility Locating

0.5 day

Mark fence line, call 811 for underground utility locates, and stake post positions every 10 feet.

Post Setting

1–2 days

Dig or auger holes 24–30 inches deep, set terminal and line posts in concrete, and brace until cured.

Fabric Stretching & Top Rail

1–2 days

Install top rail, unroll chain link fabric, and stretch taut using a come-along tool. Attach with tension bars and tie wires.

Gate Hanging & Cleanup

0.5 day

Hang walk gate, install latch hardware, trim excess fabric, and remove all debris from site.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Terminal posts (2-3/8 in, galvanized)	900	each	$18–$32	$16,200–$28,800
Line posts (1-5/8 in, galvanized)	2250	each	$10–$18	$22,500–$40,500
Chain link fabric (4 ft × 50 ft roll)	450	roll	$65–$110	$29,250–$49,500
Tension bars, bands & ties kit	1	kit	$40–$75	$40–$75
Top rail (1-3/8 in × 10.5 ft)	2250	each	$8–$14	$18,000–$31,500
Walk gate (4 ft, galvanized)	1	each	$85–$160	$85–$160

Chain Link Fence Installation in Shasta Lake — FAQ

How much does chain link fencing cost per foot in NorCal?+

Including materials and labor, expect $12–$25 per linear foot for a 4-foot residential chain link fence, or $18–$35 per foot for 6-foot height.

Is vinyl-coated chain link worth the extra cost?+

Vinyl coating adds about 15–25% to the material cost but significantly improves appearance and corrosion resistance, making it worthwhile for front yards.

Can I add privacy slats later?+

Yes. Aluminum or plastic slats can be woven into the fabric at any time, adding about $3–$6 per linear foot.