How Much Does Ceiling Water Damage Repair Cost in Ceres, CA? (2026)

Average Cost

$1,003–$1,816

Materials

$374–$777

Labor (San Joaquin Valley)

$428–$676

Labor rates in San Joaquin Valley are -8% compared to Sacramento Metro baseline.

Ceiling water damage repair includes removing stained or sagging drywall sections, inspecting framing and insulation above for moisture and mold, replacing drywall from below, taping and finishing, matching ceiling texture (popcorn, knockdown, smooth), priming with stain blocker, and painting. Ceiling work requires overhead access and scaffolding. This estimate uses Sacramento-area pricing for 2025-2026.

Ceres is located in Stanislaus County (San Joaquin Valley). Growing community south of Modesto with newer subdivisions. The local utility provider is PG&E.

Cost Calculator

Adjust details to get your estimate

City

Damaged ceiling area (4x8 sheet equivalents)

Materials Included

Ceiling drywall (1/2" lightweight)9 4x8 sheet

$126–$252

Joint compound, tape, screws3 lot

$60–$135

Ceiling texture (knockdown / popcorn / smooth)1 lot

$20–$60

Stain-blocking primer & ceiling paint6 gallon

$168–$330

Replacement batt insulation (if needed)3 bundle

$75–$150

Labor(San Joaquin Valley -8%)

Drywall installer / finisher6h @ $51–$78/hr

$304–$469

Painter (ceiling specialist)3h @ $41–$69/hr

$124–$207

Contractor Markup25%

0%Avg 30%100%

Materials

$374–$777

Labor

$428–$676

Markup

$201–$363

Estimated Total Cost

$1,003 – $1,816

$334–$605 per unit

Want Your Exact Price?

This is an estimate. Get a precise, no-obligation quote from licensed contractors.

Call (916) 476-7689 Get Free Quote

Project Timeline

Assessment & source identification

1-2 hours

Identify and stop the water source (roof leak, upstairs plumbing, condensation). Remove damaged insulation from above if accessible via attic.

Damaged drywall removal

1-3 hours

Cut out stained, sagging, or mold-affected ceiling drywall. Inspect joists for moisture and treat with antimicrobial. Ensure framing is fully dry.

Drywall installation & finishing

2-4 days (with drying time)

Install new ceiling drywall (may require drywall lift for large sections), tape and mud seams with three coats, and match ceiling texture.

Priming & painting

3-6 hours

Apply stain-blocking primer (Kilz or BIN) to prevent bleed-through, then roll ceiling paint. Paint the entire ceiling plane for uniform color.

Materials Breakdown

Material	Qty	Unit	Unit Cost	Total
Ceiling drywall (1/2" lightweight)	9	4x8 sheet	$14–$28	$126–$252
Joint compound, tape, screws	3	lot	$20–$45	$60–$135
Ceiling texture (knockdown / popcorn / smooth)	1	lot	$20–$60	$20–$60
Stain-blocking primer & ceiling paint	6	gallon	$28–$55	$168–$330
Replacement batt insulation (if needed)	3	bundle	$25–$50	$75–$150

Ceiling Water Damage Repair in Ceres — FAQ

What causes ceiling water damage?+

The most common causes are roof leaks, upstairs bathroom overflows, burst supply lines, condensation from HVAC ducts in the attic, and ice dams (rare in Sacramento). Identifying and fixing the source is critical before repairing the ceiling.

Is a water-stained ceiling dangerous?+

Water-soaked drywall can sag and eventually collapse. Even dried stains indicate past moisture intrusion that may have caused hidden mold. Have a professional assess any ceiling water stain.

Can I just paint over a water stain?+

Small, fully dried stains on solid drywall can be primed with stain-blocking primer and painted. However, if the drywall is soft, sagging, or has mold, the damaged section must be replaced.